NEXIVA® 225 (NJG)
NEXIVA® GP 225 (NJG) is a hard dispersible polymer powder based on vinyl acetate and ethylene. It is designed as a general binder for a variety of application in various industries such as Coatings and Adhesives but not limited to use.
Eigenschaften
• Biocide free binder
• Allows for the formulation of powder based products
• No organic solvents, plasticizers, film forming agents need in formulations
• Easier storage, no silo needed.
• Low odor
• No skinning compared to liquid binders
• Contains a fine mineral filler as an antiblocking agent
• Better workability in extreme climatic conditions
Datenblätter
Application
NEXIVA® GP 225 (NJG) is recommended as binder for various applications for example interior architectural paints, intumescent coatings and primers due to its adequate binding power and good re-dispersibility in water.
Processing
For the production of dry products, NEXIVA® GP 225 (NJG) can be mixed into the dry mixture. For the production of ready-to-use paint, we recommend adding NEXIVA® GP 225 (NJG) directly to the mill base, just as is the case with the filler. After the powder is mixed with water, it should ideally be applied immediately. It may be necessary to add biocides to the water-mixed powder if thepowder has not been used for a prolonged period of time before application.
Wird das Produkt in anderen Anwendungen als den aufgeführten eingesetzt, liegen Auswahl, Verarbeitung und Verwendung des Produktes in der alleinigen Verantwortung des Abnehmers. Dabei sind alle gesetzlichen und sonstigen Regelungen zu berücksichtigen.
Es können leichte Farbschwankungen des Polymergranulats auftreten, die die Funktion des Produktes nicht beeinträchtigen.
Lagerung
During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.
Vertrieb & Support
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Distributoren
Es wurden leider keine Distributoren für dieses Produkt gefunden