LC T1000

Application Fields

• For sealing joints between a wide variety of materials, such as wood, metals, plastics or mineral based substrates
• For sealing constructional joints for crack-free, paintable connection joints, non-stain area repairing
• For polyurethane repairing

Processing 

• Preparation - The substrate areas that will be in contact with the sealant must be clean. For application from cartridges cut thread open, fix nozzle on top 
• Masking - To avoid contamination and damage attach a masking tape on the side of work area.
• Primer - Non-pored substance needs primer treatment at first. 
• Sealing & Tooling - Fully fill in cross point or side edge point of the joint without empty space without bubbles. 
• Curing - Protect from dust and pollutant to have qualified surface and avoid being damaged on the surface of sealant while curing

Certification

• WACKER® T1000 is classified KS F 4910 F-25LM / Eco-Label certificated / ASTM C 1248.   

Adhesion
WACKER® T1000 exhibits excellent primerless adhesion to most non-porous siliceous material, e.g. glass, tiles, ceramics, concrete. enamel, glazed tiles and clinker Users must carry out their own tests due to the great variety of substances. The adhesion can be improved in many cases by pretreatment of the substrates with a primer. If adhesion difficulties arise please contact our technical service.

Restrictions on use
It is the user's responsibility to test the compatibility of the sealant with the adjoining materials. Incompatible substances like coating materials (paints, varnishes and glazes) or organic plasticizer containing rubbers (EPDM, butyl and neoprene) can lead to discoloration or other impairments like loss of adhesion of the sealant. Materials in direct contact with the applied sealant like cleaning agents and materials in indirect contact like gaseous emissions can damage the sealant in its function or change its appearance. Because of the multitude of these materials. Wacker cannot make a general statement to the compatibility of materials with the sealant. In case of doubt the user shall conduct appropriate preliminary tests.

• WACKER® T1000 must not be used for insulating glass applications.
• WACKER® T1000 should not be used in contact with metals such as lead, copper, brass or zinc due to corrosion.
• WACKER® T1000 may be discolored in contact with some WACKER® T1000, e.g. EPDM, APTK and neoprene.
• WACKER® T1000 should not be used for sealing of aquaria.
• WACKER® T1000 is not recommended for structural glazing bonding.
• WACKER® T1000 should not be used in contact with metals such as lead, copper, brass or zinc due to corrosion.
• WACKER® T1000 is not recommended for sealing of aquaria or for longer-term use under water.
• WACKER® T1000 is not suitable for food grade applications where the joints are likely to come in contact with food.
• WACKER® T1000 is not suitable for use as a mirror adhesive.