NEXIVA® GP 122 (NJG)
NEXIVA® GP 122 (NJG) is a flexible dispersible polymer powder based on vinyl acetate and ethylene. It is designed as a general binder for a variety of application in various industries.
• Biocide free binder.
• Allows for the formulation of powder based products.
• No organic solvents, plasticizers, film forming agents.
• Easier storage.
• Low odor
• No skinning
• Contains a fine mineral filler as an antiblocking agent
• Better workability in severe climatic conditions
Due to its adequate binding power and good re-dispersibility in water, NEXIVA® GP 122 (NJG) s recommended as binder for various applications such as interior architectural paints, intumescent coatings and primers.
For the production of dry products, such as powder paints, NEXIVA® GP 122 (NJG) can simply be added into the dry mixture. For the production of ready-to-use paint, we recommend adding NEXIVA® directly to the mill base, just as is the case with the filler. After the powder is mixed with water, it should ideally be applied immediately. It may be necessary to add biocides to the water-mixed powder if the powder has not been used for a prolonged period of time before application.
During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.
Vertrieb & Support
Es wurden leider keine Distributoren für dieses Produkt gefunden