ELASTOSIL® A 442
ELASTOSIL® A 442 is a one-component, thixotropic sealant intended for use where a soft, high elongation material is desired. ELASTOSIL® A 442 is particularly effective as an adhesive in applications where the bonded joint is subjected to relatively large movements in service.
Eigenschaften
- Tenacious adhesion to most metals, plastics, synthetic rubbers, glass and concrete
- Low modulus of elasticity for superior sealant joint movement capability
- Low compressive modulus, ideal for forming compression gaskets on covers and closures where low clamping pressures are essential
- Stays flexible between -65°F and 400°F
- Impervious to weathering and ultraviolet degradation
- Resistant to hot lubricating oils
- Causes little or no foam in lubricating oils
- Non-corrosive to ferrous metals
Datenblätter
The performance of ELASTOSIL® A 442 is dependent upon many factors, including the application method, the thickness of the layer deposited, the substrate, the curing atmosphere, and the curing cycle.
skin should form over the surface it may be removed by careful skimming. Spray equipment and brushes
should be washed and wiped clean with naphtha or mineral spirits after use.
The adhesion of ELASTOSIL® A 442 to most substrates can be enhanced by a 30 second to one minute preheat cycle at 60-70°C before exposure to the UV source
Lagerung
Vertrieb & Support
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.