SMARGO® 328 (KOR)

SMARGO® 328 (KOR) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class SMARGO®  which provides the basic properties adhesion and flexibility, giving a high degree of formulation freedom. SMARGO® 328 (KOR) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.


Properties

  • SMARGO® 328 (KOR) is comprised of a vinyl acetate-ethylene copolymer and is dispersible in water.
  • Mortar modified with SMARGO® 328 (KOR) boasts superior adhesion, cohesion, flexural strength, abrasion resistance and workability.
  • SMARGO® 328 (KOR) contains small amounts of mineral additives as anticaking agents. No organic solvents, plasticizers, or film-forming additives are added during the production process.
  • SMARGO® 328 (KOR) is a general-purpose dispersible polymer powder with neutral rheological properties. With moderate flexibility, it is recommended for use in preparing end products with low emissions.
  • SMARGO® 328 (KOR) has good bond strength to both inorganic and organic substrates and is suited to prepare mortars with high cohesive strength and tensile adhesion strength.

For typical application fields of SMARGO® 328 (KOR), refer to the section "application". Please discuss additional applications with your WACKER customer representative.

Processing

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend SMARGO® 328 (KOR) with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.

Packaging

25 kg paper bags
Big Bags or bulk on request.

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker Chemical Corporation
6870 Tilghman St
Allentown, PA 18106-9346
United States
+1  610  336-2700 (Phone)
+1 517 264-4088  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Distributors

No distributors were found for this product

Order

My media


Go to order form

Sales Contact


My favorites

My products