WACKER® FG 1000
WACKER® FG 1000 is a polydimethylsiloxane obtained by hydrolysis and polycondensation of dichlorodimethylsilane and chlorotrimethylsilane. The degree of polymerization (n) is such that the mean kinematic viscosity is 1000mm²/s at 25°C.
Direct Food additive:
WACKER® FG 1000 conforms to FDA 21 CFR § 173.340 "Defoaming Agents" as a Secondary Direct
Food Additive Permitted in Food for Human Consumption." WACKER® FG 1000 is listed in the Regulation (EC) No
1333/2008 Annex II and III as amended by Regulations (EU) Nos 1129/2011 and 1130/2011 as E 900
polydimethylsiloxane. It meets the purity requirements as laid down in Regulation (EU) No. 231/2012 and is therefore
approved as direct food additive within the EC under observance of the use restrictions in force for polydimethylsiloxane (E
900). WACKER® FG 1000 is certified according to HACCP principles. Hence, it meets the requirements on food hygiene in
accordance with Regulation (EC) No. 852/2004.
WACKER® FG 1000 complies with the Recommendation "XV Silicones" of the BfR concerning the manufacture of essential
commodities that have contact with food.
WACKER® FG 1000 is listed under PM-Nr. 76721 in Regulation (EU) No. 10/2011 as an additive for plastic materials to
come into contact with food and meets the specifications under column (4) and (10). The product is not subject to a
specific migration limit (SML).
WACKER® FG 1000 is suitable for use under FDA 21 CFR as follows:
§175.300 (RESINOUS AND POLYMERIC COATINGS)
§176.170 (COMPONENTS OF PAPER AND PAPERBOARD IN CONTACT WITH AQUEOUS AND FATTY FOODS)
§176.180 (COMPONENTS OF PAPER AND PAPERBOARD IN CONTACT WITH DRY FOOD).
§176.200 (DEFOAMING AGENTS USED IN COATINGS)
§176.210 (DEFOAMING AGENTS USED IN THE MANUFACTURE OF PAPER AND PAPERBOARD)
§177.1210 (CLOSURES WITH SEALING GASKETS FOR FOOD CONTAINERS).
§177.2800 (TEXTILES AND TEXTILE FIBERS). §178.3120 (ANIMAL GLUE).
§178.3570 (LUBRICANTS WITH INCIDENTAL FOOD CONTACT)
§178.3910 (SURFACE LUBRICANTS USED IN THE MANUFACTURE OF METALLIC ARTICLES)
§181.28 (RELEASE AGENTS)
WACKER® FG 1000 meets the criteria for an exemption from the requirements of a tolerance when used as an additive in
pesticide formulations to be applied to growing crops or raw agricultural commodities after harvest as specified in 40 CR
National regulations applicable in the countries concerned must be observed.
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
WACKER® FG 1000 is used predominantly to control foam in lipophilic systems (foods rich in oil or fat, e.g. deep-frying oil) or for surface treatment. WACKER® FG 1000 also serves as the base material in the production of antifoams compliant with the regulations pertaining to food for human consumption.
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.