ELASTOSIL® VARIO 40

$ELASTOSIL<sup>®</sup> VARIO 40

Pourable, addition-curing two-component silicone rubber that vulcanizes at room temperature.

Can be blended with ELASTOSIL® VARIO 15 to achieve any target hardness between 15 and 40 Shore A
See our flyer:
"ELASTOSIL® VARIO MODULAR ADDITION CURING SYSTEM"    



Properties

  • Two base components, two catalysts
  • Easy to process because of low viscosity
  • Fast and non-shrink cure at room temperature, adjustable over a wide range
  • Higher hardness 40 Shore A
  • High elongation, outstanding tensile strength
  • Excellent tear strength
  • Cured rubber is translucent and colorless
  • Can be pigmented with 1 - 4 % ELASTOSIL® Pigment Pastes FL

Specific features of ELASTOSIL® VARIO 40

  • Crosslinking Property: Two-component
  • Product Rheology: Low viscosity
  • Product Type: Two-component
  • Specific Features: Fast curing
  • Specific Features: Low viscosity
  • Specific Features: Two-component

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

Due to its  resisitance to all common reproduction materrials. e.g. casting resins, concrete, plaster, as well as the mechanical properties, ELASTOSIL®  VARIO 40 is especially suittable for all molds..

As a higher Shore A addition silicone rubber that cures without undergoing dimensional shrinkage,  ELASTOSIL®  VARIO 40  is also suitable if absolutely  accurate copies of models are required.

Packaging

ELASTOSIL® VARIO 40     5 KG  CANISTER

ELASTOSIL® VARIO 40   20 KG  HOBBOCK PE

ELASTOSIL® VARIO 40  200 KG DRUM SB

Storage

ELASTOSIL® VARIO 40 should be stored between 5 °C and 25 °C in the tightly closed original container. The 'Best use before end' date of each batch appears on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Please choose an application for viewing your product matches.

Order

My media


My favorites

My products