ELASTOSIL® R 805/75 OH

Vulcanisates made from ELASTOSIL® R 805/75 OH are noted for their good resistance to engine oils and aggressive mineral oils, even at high temperatures. They have good mechanical properties and a low compression set.



Properties

ELASTOSIL® R 805/75 OH is an oil resitant peroxide-curing silicone rubber.

 

The addition of heat stabilizers at service temperatures of more than 180 °C is recommended.

 

Further information to improve the heat stability by use of specific ELASTOSIL® AUX Heat Stabilizers can be obtained from the Technical Information Sheet "ELASTOSIL® AUX Stabilizers H" or from the latest brochures.

Specific features of ELASTOSIL® R 805/75 OH

  • Low compression set
  • Oil resistant

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

ELASTOSIL® R 805/75 OH can be processed by compression, transfer and injection moulding. Usually post-curing is not necessary. To achieve an optimum compression set, it is advisable to post-cure the material for 4 hours at 200 °C.

ELASTOSIL® R 805/75 OH is especially recommended for the production of shaft seals.

The raw rubber requires the addition of peroxides for vulcanization at elevated temperatures. A homogeneous  incorporation is a must, but please avoid temperatures >30°C along the incorporation process in order to maintain best processing behavior. Pot life is depending on the used peroxide and storage condition.

For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".

Packaging

This product is available in 20 kg and 540 kg cardboard packaging.

Storage

Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Order

My media


My favorites

My products