VINNAPAS® UW 2 FS

VINNAPAS® UW 2 FS is a solid, thermoplastic homopolymer. The clear and colorless resin is prepared by polymerization of vinyl acetate. VINNAPAS® UW 2 FS is tasteless. 


Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from WACKER subsidiaries or may be downloaded via WACKER web site http://www.wacker.com.

Typical applications for VINNAPAS® UW 2 FS:

  • fiber reinforced plastics
  • Adhesives
  • powder injection molding
  • sound damping

 

Processing

Product data

Melt viscosity, 100% Polymer

Bohlin high temperature viscosimeter

140 °C                       ~ 4700 Pa·s

160 °C                       ~ 2600 Pa·s

180 °C                       ~ 1200 Pa·s

200 °C                       ~  600 Pa·s

 

Solid content            Viscosity Brookfield RVT,

in styrene                  20 RPM, 23°C (PML 002)

20 %                                 280 mPa·s

30 %                                1800 mPa·s

40 %                                9900 mPa·s

If the product is used in applications other than those mentioned, the choice, processing and use of the product is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

For questions concerning food contact status according the chapter 21 CFR (US FDA) and German BfR, please feel free to contact us.

Wacker Chemie AG
Hanns-Seidel-Platz 4
D-81737 München
Germany

Packaging

VINNAPAS® UW 2 FS is supplied in 25 kg Paper Bags. Big Bag is available on request.

Storage

VINNAPAS® UW 2 FS should not be stored at temperatures above 20 °C in order to prevent caking. Storage conditions must be dry; material must be protected from direct sun exposure.

Under these conditions the product has a shelf life of at least 12 months starting from the date of receipt.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian 49221-9397
United States
+1  888  922-5374 (Phone)
+1 517 264-8246  (Fax)
Kontakt
Website

How can we help you?

    Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample