ETONIS® 7245 A
ETONIS® 7245 A is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of +23 °C. and is used in asphalt emulsion-based applications. ETONIS® 7245 A imparts excellent adhesion, abrasion resistance, tensile strength, film flexibility, and faster drying time.
Eigenschaften
ETONIS® 7245 A can be compounded with asphalt emulsion and is combinable with common additives such as emulsifier, defoamer, thickeners and fillers. In asphalt emulsion, ETONIS® 7245 A is compatible with both cationic and anionic systems. ETONIS® 7245 A improves rheology, softening point, elastic recovery, torsional recovery and tensile strength in residual asphalt. It provides excellent adhesion, abrasion resistance, and fuel resistance in surface treatment applications.
Dokumente
Anwendungsdetails
ETONIS® 7245 A is suitable for modifying both anionic and cationic asphalt emulsions where rapid setting, good machining, and easy clean-up properties are required. It is used in waterproofing, roofing, tack coat, chip seal, fog seal, scrub seal, micro surfacing and sealers, and other cold asphalt applications.
If ETONIS® 7245 A is used in applications other than those mentioned, the choice, processing and use of ETONIS® 7245 A is the sole responsibility of the purchaser. All legal and other regulations must be complied with. Slight discoloration may occur without impairing the product's functionality.
ETONIS® 7245 A may be used with both anionic and cationic asphalt emulsions. ETONIS® 7245 A can be incorporated into asphalt emulsion through addition to the soap solution (batch process) or via co-milling (continuous process). It may also be added directly to the asphalt emulsion with minimal stirring. The amount of ETONIS® 7245 A needed to modify cold asphalt emulsions ranges from 1.0 - 5. % v/v relative to the asphalt emulsion. The amounts used in special applications for higher ductility, flexibility and elongation may be considerably higher. The exact amount will depend on the requirements profile.
Verpackung & Lagerung
Verpackung / Gebinde
Totes and Bulk.
Lagerung
Das Produkt ist während der Lagerung vor der Einwirkung von Feuchtigkeit zu schützen. Eine längere Lagerung bei Temperaturen über 30°C, auch in Verbindung mit Druckbelastung, Feuchtigkeit oder Sonneneinstrahlung, kann zur Verblockung führen. Offene Gebinde sollten sorgfältig verschlossen und ebenfalls entsprechend gelagert werden. Daher empfiehlt sich ein Lagerhaus, in dem das Produkt kühl und trocken aufbewahrt werden kann. Lagern Sie das Produkt nicht länger als sechs Monate, beginnend mit dem Eingangsdatum, es sei denn, das Analysezertifikat enthält ein anderes Datum, welches dann Vorrang hätte. Eine Lagerung über den empfohlenen Zeitpunkt hinaus bedeutet nicht, dass das Produkt unbrauchbar geworden ist. Eine Überprüfung der für den vorgesehenen Einsatzzweck erforderlichen Eigenschaften durch den Anwender ist dann jedoch ratsam.Vertrieb & Support
Distributoren
WACKER verfügt weltweit über ein Netzwerk fachkundiger Vertriebspartner. Bitte wählen Sie noch eine Anwendung aus damit wir Ihnen Ihre Ansprechpartner nennen können.
Konrad-Adenauer-Ufer 41-45
50668 Köln