VINNEX® 8880 is an innovative compound based on a vinyl acetate/vinyl laurate copolymer and polyvinyl acetate.
VINNEX® 8880 is a colorless, tasteless and odorless thermoplastic resin in dosable form and can be melted easily.
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from WACKER subsidiaries or may be downloaded via WACKER web site http://www.wacker.com.
VINNEX® 8880 is recommended for transparent films and injection molding applications. It is a flexible polymer with a low melt viscosity in thermoplastic processing. It shows excellent compatibility with Biopolyesters like PLA. The melt viscosity and the metallic noise of the PLA film will be significantly reduced. In combination with PLA the processing temperature needs to be lowered. The typical level of VINNEX 8880 for modifying PLA is in the range of 5 to 40 %.
Food contact regulations VINNEX 8880 is in compliance with EU:
- Regulation (EU) No 10/2011
- Regulation (EU) No 321/2011
- Regulation (EU) No 1183/2012
- Regulation (EU) No 202/2014
Further information is available upon request.
If the product is used in applications other than those mentioned, the choice, processing and use of the product is the sole responsibility of the purchaser. All legal and other regulations must be complied with.
For questions concerning food contact status according the chapter 21 CFR (US FDA) and German BfR, please feel free to contact us.Wacker Chemie AG Hanns-Seidel-Platz 4 D-81737 München Germany
VINNEX® 8880 is delivered in 25 kg bags.
To prevent caking VINNEX® 8880 should not be stored at temperatures above 15°C. Storage conditions must be dry; material must be protected from direct sun exposure.
Under these conditions the product has a shelf life of 12 months.
Sales and support
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Would you like a product sample?
You can request a product sample here.Request sample
Please choose an application for viewing your product matches.