POWERSIL® 466 A/B is a liquid silicone rubber with medium conductivity, stable electrical properties and good mechanical properties.


  • high elongation at break, low tension set
  • stable electrical properties
  • good mechanical properties
  • ready-to-use, two-component system

Spezifische Merkmale von POWERSIL® 466 A/B

  • elektrisch leitfähig
  • kaltschrumpfbar

POWERSIL® 466 A/B is suitable for production of electrically conductive injection moulded articles, especially cable accessories in the medium and high voltage range. The range of use spreads from push-on accessories to cold shrink applications. POWERSIL® 466 A/B combines a low Shore A durometer with high elongation, good setting properties (low tension set) and good mechanical properties which are a must for cold shrink applications.

Components A and B are delivered ready to use in drums of 20 and 200 litres capacity. They can be pumped by means of standard metering equipment from these drums and mixing in a static mixer straight into the heated mold.

The mixing ratio is 1 : 1. At room temperature, mixtures of A and B components have a pot life of at least three days.

For detailed information, refer to brochures on www.wacker.com.


Verpackung / Gebinde

This product is available in 20 kg pail and 200 kg drum kits.


The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
+49  711  61942-0 (Phone)
+49 711 61942-61  (Fax)

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen


Meine Medien

Meine Favoriten

Meine Produkte