ELASTOSIL® R 861/60 S
These translucent compounds are highly flexible and are noted for their low compression set and improved media and coolant resistance.
Spezifische Merkmale von ELASTOSIL® R 861/60 S
- sehr niedriger Druckverformungsrest
This compound can be used in the manufacture of molded parts, but also particularly extrusion, for producing profiles, e. g. for windows and facades.
Provided appropriate processing, articles produced from ELASTOSIL® R 861/60 S can be used for food contact applications in accordance with the Recommendation "XV. Silicones" of the BfR and FDA 21 CFR § 177.2600 under observance of any given limitations on extractable and volatile substances. Furthermore, the product contains low levels of residual toluene which has to be completely removed from the final food contact article.
To obtain optimum compression set values it is advisable to post-cure for 4 hours at 200°C. We recommend to use 1.5 % Curing Agent E for the manufacture of extrudates, and 0.7 % C1 or 1.2 % C6 for molded parts.
For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".
Verpackung / Gebinde
This product is available in 20 kg and 540 kg cardboard packaging.
Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.
Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.