ELASTOSIL® R 570/60 OH

ELASTOSIL® R 570/60 OH is a peroxide curing HCR silicone rubber for the manufacture of electrically conductive products.



Eigenschaften

This product is electrically conductive and shows a low volume resistivity.

 

ELASTOSIL® R 570/60 OH is not suitable for vulcanisation using crosslinker E.

 

This product can be used within a temperature range of - 55 °C to + 210 °C.

Spezifische Merkmale von ELASTOSIL® R 570/60 OH

  • elektrisch leitfähig

Disclaimer

Alle unsere Angaben beruhen auf bestem Wissen. Allerdings übernehmen wir hierfür keine Haftung oder Gewährleistung und behalten uns jederzeit technische Änderungen vor. Es liegt in der eigenen Verantwortung des Käufers, die Angaben sowie die Geeignetheit unseres Produktes für den vorgesehenen Einsatzzweck vor dem Gebrauch zu überprüfen. Vertragliche Regelungen gehen immer vor. Der Gewährleistungs- und Haftungsausschluss gilt - insbesondere im Ausland - auch im Hinblick auf Schutzrechte Dritter.

Control elements for cable accessories, contacts and keypads, interconnectors, electrically conductive rollers, electrodes.

The raw rubber requires the addition of peroxides for vulcanization at elevated temperatures. A homogeneous  incorporation is a must, but please avoid temperatures >30°C along the incorporation process in order to maintain best processing behavior. Pot life is depending on the used peroxide and storage condition.

 

IMPORTANT: in order to produce a ready-to-use-compound, an increased concentration of peroxide is needed. ELASTOSIL® R 570/60 OH can be crosslinked with 2.5 % crosslinker C1 or crosslinker C6. Crosslinker E is not suitable!

 

Processing by press moulding or extrusion and curing by cure vapor (CV). Post curing for 4h at 200°C is necessary.    



For detailed information refer to our latest brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".

Verpackung / Gebinde

This product is available in 20 kg and 540 kg cardboard packaging.

Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.

Lagerung

Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Deutschland
+49  711  61942-0 (Phone)
+49 711 61942-61  (Fax)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Mehr Produkte

Produkte Technische Daten
Aussehen Härte Shore A Reißfestigkeit Reißdehnung Weiterreißwiderstand Druckverformungsrest
ELASTOSIL® R 101/25 OH translucent translucent 23[1] 23[1] 7,0 N/mm²[2] 7,0 N/mm²[2] 900 %[3] 900 %[3] 14 N/mm[4] 14 N/mm[4] 13 %[5] 13 %[5]
ELASTOSIL® R 101/35 OH translucent translucent 35[1] 35[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 700 %[3] 700 %[3] 16 N/mm[4] 16 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® R 101/45 OH translucent translucent 47[1] 47[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 540 %[3] 540 %[3] 18 N/mm[4] 18 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® R 101/65 OH translucent translucent 65[1] 65[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 200 %[3] 200 %[3] 16 N/mm[4] 16 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® R 401/10 OH transparent transparent 13[1] 13[1] 6,00 N/mm²[2] 6,00 N/mm²[2] 1200 %[3] 1200 %[3] 24 N/mm[4] 24 N/mm[4] 41 %[5] 41 %[5]
ELASTOSIL® R 401/20 OH transparent transparent 23[1] 23[1] 9,0 N/mm²[2] 9,0 N/mm²[2] 1000 %[3] 1000 %[3] 27 N/mm[4] 27 N/mm[4] 33 %[5] 33 %[5]
ELASTOSIL® R 401/30 OH transparent transparent 34[1] 34[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 720 %[3] 720 %[3] 22 N/mm[4] 22 N/mm[4] 20 %[5] 20 %[5]
ELASTOSIL® R 401/30 S transparent transparent 33[1] 33[1] 10 N/mm²[2] 10 N/mm²[2] 800 %[3] 800 %[3] 24 N/mm[4] 24 N/mm[4] 15 %[5] 15 %[5]
ELASTOSIL® R 401/40 S transparent transparent 41[1] 41[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 730 %[3] 730 %[3] 28 N/mm[4] 28 N/mm[4] 16 %[5] 16 %[5]
ELASTOSIL® R 401/50 S transparent transparent 52[1] 52[1] 12,0 N/mm²[2] 12,0 N/mm²[2] 640 %[3] 640 %[3] 29 N/mm[4] 29 N/mm[4] 17 %[5] 17 %[5]
ELASTOSIL® R 401/55 S transparent transparent 55[1] 55[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 470 %[3] 470 %[3] 23 N/mm[4] 23 N/mm[4] 35 %[5] 35 %[5]
ELASTOSIL® R 401/60 S transparent transparent 62[1] 62[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 530 %[3] 530 %[3] 26 N/mm[4] 26 N/mm[4] 16 %[5] 16 %[5]
ELASTOSIL® R 401/70 S transparent transparent 71[1] 71[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 530 %[3] 530 %[3] 31 N/mm[4] 31 N/mm[4] 22 %[5] 22 %[5]
ELASTOSIL® R 401/80 S transparent transparent 81[1] 81[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 430 %[3] 430 %[3] 26 N/mm[4] 26 N/mm[4] 41 %[5] 41 %[5]
ELASTOSIL® R 401/90 OH transparent transparent 89[1] 89[1] 7,4 N/mm²[2] 7,4 N/mm²[2] 160 %[3] 160 %[3] 14 N/mm[4] 14 N/mm[4] 19 %[5] 19 %[5]
ELASTOSIL® R 420/30 OH transparent transparent 29[1] 29[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 930 %[3] 930 %[3] 33 N/mm[4] 33 N/mm[4] 18 %[5] 18 %[5]
ELASTOSIL® R 420/40 S transparent transparent 43[1] 43[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 800 %[3] 800 %[3] 37 N/mm[4] 37 N/mm[4] 24 %[5] 24 %[5]
ELASTOSIL® R 420/50 S transparent transparent 53[1] 53[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 730 %[3] 730 %[3] 41 N/mm[4] 41 N/mm[4] 23 %[5] 23 %[5]
ELASTOSIL® R 420/60 S transparent transparent 62[1] 62[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 660 %[3] 660 %[3] 43 N/mm[4] 43 N/mm[4] 25 %[5] 25 %[5]
ELASTOSIL® R 420/70 S transparent transparent 72[1] 72[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 570 %[3] 570 %[3] 45 N/mm[4] 45 N/mm[4] 38 %[5] 38 %[5]
ELASTOSIL® R 490/55 OH transparent transparent 53[1] 53[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 520 %[3] 520 %[3] 30 N/mm[4] 30 N/mm[4] 28 %[5] 28 %[5]
ELASTOSIL® R 570/50 OH black black 52[1] 52[1] 7,9 N/mm²[2] 7,9 N/mm²[2] 370 %[3] 370 %[3] 14 N/mm[4] 14 N/mm[4] 37 %[5] 37 %[5]
ELASTOSIL® R 570/60 OH black black 62[1] 62[1] 7,4 N/mm²[2] 7,4 N/mm²[2] 230 %[3] 230 %[3] 12 N/mm[4] 12 N/mm[4] 29 %[5] 29 %[5]
ELASTOSIL® R 570/70 OH black black 71[1] 71[1] 7,4 N/mm²[2] 7,4 N/mm²[2] 180 %[3] 180 %[3] 13 N/mm[4] 13 N/mm[4] 29 %[5] 29 %[5]
ELASTOSIL® R 573/50 A/B black black 50[1] 50[1] 5,5 N/mm²[2] 5,5 N/mm²[2] 340 %[3] 340 %[3] 13 N/mm[4] 13 N/mm[4] 30 %[6] 30 %[6]
ELASTOSIL® R 573/70 A/B black black 71[1] 71[1] 6,2 N/mm²[2] 6,2 N/mm²[2] 246 %[3] 246 %[3] 14 N/mm[4] 14 N/mm[4] 29 %[6] 29 %[6]
ELASTOSIL® R 700/40 OH translucent translucent 42[1] 42[1] 7,3 N/mm²[2] 7,3 N/mm²[2] 470 %[3] 470 %[3] 14 N/mm[4] 14 N/mm[4] 10 %[7] 10 %[7]
ELASTOSIL® R 700/80 OH beige beige 83[1] 83[1] 6,2 N/mm²[2] 6,2 N/mm²[2] 190 %[3] 190 %[3] 16 N/mm[4] 16 N/mm[4] 17 %[7] 17 %[7]
ELASTOSIL® R 701/40 S opaque opaque 40[1] 40[1] 6,9 N/mm²[2] 6,9 N/mm²[2] 460 %[3] 460 %[3] 15 N/mm[4] 15 N/mm[4] 7 %[7] 7 %[7]
ELASTOSIL® R 701/50 OH beige beige 51[1] 51[1] 7,8 N/mm²[2] 7,8 N/mm²[2] 470 %[3] 470 %[3] 17 N/mm[4] 17 N/mm[4] 7 %[7] 7 %[7]
ELASTOSIL® R 701/60 OH beige beige 61[1] 61[1] 7,6 N/mm²[2] 7,6 N/mm²[2] 340 %[3] 340 %[3] 17 N/mm[4] 17 N/mm[4] 6 %[7] 6 %[7]
ELASTOSIL® R 701/70 OH beige beige 71[1] 71[1] 7,8 N/mm²[2] 7,8 N/mm²[2] 280 %[3] 280 %[3] 16 N/mm[4] 16 N/mm[4] 7 %[7] 7 %[7]
ELASTOSIL® R 701/80 S beige beige 80[1] 80[1] 7,6 N/mm²[2] 7,6 N/mm²[2] 200 %[3] 200 %[3] 16 N/mm[4] 16 N/mm[4] 17 %[7] 17 %[7]
ELASTOSIL® R 750/40 OH translucent translucent 38[1] 38[1] 10,5 N/mm²[2] 10,5 N/mm²[2] 630 %[3] 630 %[3] 26 N/mm[4] 26 N/mm[4] 26 %[5] 26 %[5]
ELASTOSIL® R 750/50 OH translucent translucent 48[1] 48[1] 10,5 N/mm²[2] 10,5 N/mm²[2] 530 %[3] 530 %[3] 26 N/mm[4] 26 N/mm[4] 20 %[5] 20 %[5]
ELASTOSIL® R 750/60 OH translucent translucent 56[1] 56[1] 8,1 N/mm²[2] 8,1 N/mm²[2] 460 %[3] 460 %[3] 23 N/mm[4] 23 N/mm[4] 14 %[5] 14 %[5]
ELASTOSIL® R 752/50 OH translucent translucent 50[1] 50[1] 9,9 N/mm²[2] 9,9 N/mm²[2] 770 %[3] 770 %[3] 32 N/mm[4] 32 N/mm[4] 38 %[5] 38 %[5]
ELASTOSIL® R 752/70 OH translucent translucent 70[1] 70[1] 8,5 N/mm²[2] 8,5 N/mm²[2] 460 %[3] 460 %[3] 22 N/mm[4] 22 N/mm[4] 19 %[5] 19 %[5]
ELASTOSIL® R 755/40 OH white white 44[1] 44[1] 4,2 N/mm²[2] 4,2 N/mm²[2] 340 %[3] 340 %[3] 9 N/mm[4] 9 N/mm[4] - -
ELASTOSIL® R 755/60 OH opaque opaque 61[1] 61[1] 7,8 N/mm²[2] 7,8 N/mm²[2] 300 %[3] 300 %[3] 14 N/mm[4] 14 N/mm[4] 16 %[5] 16 %[5]
ELASTOSIL® R 756/40 OH transparent transparent 41[1] 41[1] 8,8 N/mm²[2] 8,8 N/mm²[2] 610 %[3] 610 %[3] 20 N/mm[4] 20 N/mm[4] 9 %[5] 9 %[5]
ELASTOSIL® R 756/50 OH transparent transparent 47[1] 47[1] 9,5 N/mm²[2] 9,5 N/mm²[2] 540 %[3] 540 %[3] 21 N/mm[4] 21 N/mm[4] 9 %[5] 9 %[5]
ELASTOSIL® R 756/60 OH transparent transparent 59[1] 59[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 440 %[3] 440 %[3] 23 N/mm[4] 23 N/mm[4] 9 %[5] 9 %[5]
ELASTOSIL® R 756/70 OH transparent transparent 70[1] 70[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 380 %[3] 380 %[3] 24 N/mm[4] 24 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® R 771/60 OH - - 60[1] 60[1] 3,4 N/mm²[2] 3,4 N/mm²[2] 410 %[3] 410 %[3] 16 N/mm[4] 16 N/mm[4] - -
ELASTOSIL® R 771/70 OH - - 70[1] 70[1] 4,0 N/mm²[2] 4,0 N/mm²[2] 270 %[3] 270 %[3] 18 N/mm[4] 18 N/mm[4] - -
ELASTOSIL® R 861/60 S translucent translucent 60[1] 60[1] 8,4 N/mm²[2] 8,4 N/mm²[2] 390 %[3] 390 %[3] 18 N/mm[4] 18 N/mm[4] 6 %[5] 6 %[5]
ELASTOSIL® R 861/70 S translucent translucent 73[1] 73[1] 8,6 N/mm²[2] 8,6 N/mm²[2] 290 %[3] 290 %[3] 17 N/mm[4] 17 N/mm[4] 8 %[5] 8 %[5]
ELASTOSIL® R 863/65 MH - - 65[1] 65[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 440 %[3] 440 %[3] 20 N/mm[4] 20 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® R 865/40 S translucent translucent 40[1] 40[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 430 %[3] 430 %[3] 13 N/mm[4] 13 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® R 865/50 S translucent translucent 48[1] 48[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 370 %[3] 370 %[3] 14 N/mm[4] 14 N/mm[4] 7 %[5] 7 %[5]
ELASTOSIL® R 865/60 S translucent translucent 60[1] 60[1] 9,3 N/mm²[2] 9,3 N/mm²[2] 380 %[3] 380 %[3] 18 N/mm[4] 18 N/mm[4] 5 %[5] 5 %[5]
ELASTOSIL® R 865/70 S translucent translucent 69[1] 69[1] 8,9 N/mm²[2] 8,9 N/mm²[2] 310 %[3] 310 %[3] 18 N/mm[4] 18 N/mm[4] 8 %[5] 8 %[5]
ELASTOSIL® R plus 4000/40 MH transparent transparent 40[1] 40[1] 9,3 N/mm²[2] 9,3 N/mm²[2] 860 %[3] 860 %[3] 46 N/mm[4] 46 N/mm[4] 35 %[5] 35 %[5]
ELASTOSIL® R plus 4000/50 transparent transparent 50[1] 50[1] 9,1 N/mm²[2] 9,1 N/mm²[2] 850 %[3] 850 %[3] 49 N/mm[4] 49 N/mm[4] 43 %[5] 43 %[5]
ELASTOSIL® R plus 4000/60 transparent transparent 60[1] 60[1] 9,9 N/mm²[2] 9,9 N/mm²[2] 680 %[3] 680 %[3] 50 N/mm[4] 50 N/mm[4] 23 %[5] 23 %[5]
ELASTOSIL® R plus 4000/70 transparent transparent 70[1] 70[1] 9,3 N/mm²[2] 9,3 N/mm²[2] 590 %[3] 590 %[3] 54 N/mm[4] 54 N/mm[4] 19 %[5] 19 %[5]
ELASTOSIL® R plus 4001/20 MH transparent transparent 20[1] 20[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 1300 %[3] 1300 %[3] 34 N/mm[4] 34 N/mm[4] 30 %[5] 30 %[5]
ELASTOSIL® R plus 4001/30 MH transparent transparent 30[1] 30[1] 11,5 N/mm²[2] 11,5 N/mm²[2] 1030 %[3] 1030 %[3] 45 N/mm[4] 45 N/mm[4] 37 %[5] 37 %[5]
ELASTOSIL® R plus 4001/40 MH transparent transparent 40[1] 40[1] 10,9 N/mm²[2] 10,9 N/mm²[2] 1000 %[3] 1000 %[3] 38 N/mm[4] 38 N/mm[4] 22 %[5] 22 %[5]
ELASTOSIL® R plus 4001/50 MH transparent transparent 50[1] 50[1] 11,5 N/mm²[2] 11,5 N/mm²[2] 870 %[3] 870 %[3] 39 N/mm[4] 39 N/mm[4] 20 %[5] 20 %[5]
ELASTOSIL® R plus 4001/60 MH transparent transparent 60[1] 60[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 740 %[3] 740 %[3] 30 N/mm[4] 30 N/mm[4] 20 %[5] 20 %[5]
ELASTOSIL® R plus 4001/70 MH transparent transparent 70[1] 70[1] 10,3 N/mm²[2] 10,3 N/mm²[2] 740 %[3] 740 %[3] 38 N/mm[4] 38 N/mm[4] 30 %[5] 30 %[5]
ELASTOSIL® R plus 4001/80 MH transparent transparent 80[1] 80[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 640 %[3] 640 %[3] 29 N/mm[4] 29 N/mm[4] 45 %[5] 45 %[5]
ELASTOSIL® R plus 4001/90 MH transparent transparent 88[1] 88[1] 6,2 N/mm²[2] 6,2 N/mm²[2] 225 %[3] 225 %[3] 21 N/mm[4] 21 N/mm[4] 43 %[5] 43 %[5]
ELASTOSIL® R plus 4020/40 MH transparent transparent 39[1] 39[1] 10,9 N/mm²[2] 10,9 N/mm²[2] 1000 %[3] 1000 %[3] 46 N/mm[4] 46 N/mm[4] 29 %[5] 29 %[5]
ELASTOSIL® R plus 4020/50 MH transparent transparent 49[1] 49[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 830 %[3] 830 %[3] 45 N/mm[4] 45 N/mm[4] 26 %[5] 26 %[5]
ELASTOSIL® R plus 4020/60 MH transparent transparent 59[1] 59[1] 11,9 N/mm²[2] 11,9 N/mm²[2] 850 %[3] 850 %[3] 48 N/mm[4] 48 N/mm[4] 18 %[5] 18 %[5]
ELASTOSIL® R plus 4020/70 MH transparent transparent 71[1] 71[1] 10,4 N/mm²[2] 10,4 N/mm²[2] 660 %[3] 660 %[3] 51 N/mm[4] 51 N/mm[4] 22 %[5] 22 %[5]
ELASTOSIL® R plus 4050/55 transparent transparent 58[1] 58[1] 8,4 N/mm²[2] 8,4 N/mm²[2] 400 %[3] 400 %[3] 23 N/mm[4] 23 N/mm[4] 6 %[5] 6 %[5]
ELASTOSIL® R plus 4050/55 MH 9005 black black 58[1] 58[1] 8,4 N/mm²[2] 8,4 N/mm²[2] 400 %[3] 400 %[3] 23 N/mm[4] 23 N/mm[4] 6 %[5] 6 %[5]
ELASTOSIL® R plus 4060/50 MH transparent transparent 50[1] 50[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 500 %[3] 500 %[3] 25 N/mm[4] 25 N/mm[4] 9 %[5] 9 %[5]
ELASTOSIL® R plus 4060/60 MH transparent transparent 60[1] 60[1] 7,5 N/mm²[2] 7,5 N/mm²[2] 380 %[3] 380 %[3] 20 N/mm[4] 20 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® R plus 4066/60 MH transparent transparent 60[1] 60[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 660 %[3] 660 %[3] 40 N/mm[4] 40 N/mm[4] 27 %[5] 27 %[5]
ELASTOSIL® R plus 4070/20 MH translucent translucent 22[1] 22[1] 7,9 N/mm²[2] 7,9 N/mm²[2] 1300 %[3] 1300 %[3] 35 N/mm[4] 35 N/mm[4] 57 %[7] 57 %[7]
ELASTOSIL® R plus 4070/30 MH translucent translucent 31[1] 31[1] 10,5 N/mm²[2] 10,5 N/mm²[2] 1200 %[3] 1200 %[3] 52 N/mm[4] 52 N/mm[4] 46 %[7] 46 %[7]
ELASTOSIL® R plus 4070/60 MH translucent translucent 62[1] 62[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 790 %[3] 790 %[3] 39 N/mm[4] 39 N/mm[4] 49 %[7] 49 %[7]
Legend
[1] Härte Shore A | DIN ISO 48-4,  [2] Reißfestigkeit | ISO 37 Type 1,  [3] Reißdehnung | ISO 37 Type 1,  [4] Weiterreißwiderstand | ASTM D 624 B,  [5] Druckverformungsrest | 22 h | 175 °C | DIN ISO 815-1 Typ B Methode A | post-cured 4 h / 200 °C,  [6] Druckverformungsrest | 22 h | 175 °C | DIN ISO 815-1 Typ B Methode A | post-cured 0.5 h / 200 °C,  [7] Druckverformungsrest | 22 h | 175 °C | DIN ISO 815-1 Typ B Methode A 

Bestellen

Meine Medien


Meine Favoriten

Meine Produkte