ELASTOSIL® COLOR PASTE FL YELLOW RAL 1033
ELASTOSIL® COLOR PASTE FL YELLOW RAL 1033 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers which are commonly used to produce ELASTOSIL® liquid silicone rubber.
This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration as it may be observed for systems based on silicone oil.
ELASTOSIL® COLOR PASTE FL YELLOW RAL 1033 is pourable and ready-to-use after stirring up. A dilution is not required.
The colors have generally a good resistance to sunlight, UV and hot air. The resistance should be checked for individual cases, especially for long term applications. If the dosage recommendations are followed, the mechanical properties of the colored vulcanizates will not be significantly impaired.
Spezifische Merkmale von ELASTOSIL® COLOR PASTE FL YELLOW RAL 1033
- BfR konform
- FDA konform
- niedriger Flüchtigengehalt
ELASTOSIL® COLOR PASTE FL YELLOW RAL 1033 has been developed particularly for coloring addition-curing ELASTOSIL® LR liquid silicone rubber and ELASTOSIL® RT RTV-2 silicone rubber.
ELASTOSIL® COLOR PASTE FL YELLOW RAL 1033 may be used for coloring silicone parts intended for sensitive applications and complying with the “Recommendation XV. Silicones" and “IX. Pigments for coloring plastics" of the BfR and FDA Regulation CFR 21 § 177.2600 "Rubber Articles Intended for Repeated Use" under observance of any given limitations on extractable and volatile substances. Please see the actual Product Compliance Sheet of this product and/or the separate Food Contact Statement for detailed information about food contact including information about any limitation in view of dosage and/or condition of use that may apply for this product.
Before using ELASTOSIL® COLOR PASTES FL, the paste must be thoroughly stirred. This is also required if there has been a long interruption in production. It may be necessary to repeat this procedure in case of very long production runs.
Depending on the color intensity desired, 0.5 to 4.0 % pigment paste should be added, the usual dosage being 2 %. Generally, the dosage should be kept at a minimum. In individual cases, an excess of color paste may slow down the curing characteristics. Customers may produce other colors by mixing pigment pastes. Suggestions for formulations can be provided on request.
Verpackung / Gebinde
This product is available in 20 kg pail and 1kg tin.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case however, the properties required for the intended use must be checked for quality assurance reasons.