ELASTOSIL® RD 6600 F

Solvent-based, addition curing silicone rubber dispersion for textile coatings



Properties

  • Deep penetration into the fabric
  • Dry surface touch
  • Excellent mechanical properties

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

ELASTOSIL® RD 6600 F is a silicone rubber dispersion in xylene. It is well suited to produce textile coatings with good penetration into the substrate and dry surface touch (e.g. conveyor belts and electrical sleevings).

ELASTOSIL® RD 6600 F can also be further diluted with solvents and used for fine coatings with low add-on weight. 

ELASTOSIL® RD 6600 F is processed by thorough incorporation of a crosslinker.

 

Recommended ratio is 100 parts of ELASTOSIL® RD 6600 F plus

 

- 1 part of CROSSLINKER W

 

Pot life at 23°C: 3 days

 

Recommended curing conditions: evaporation of the solvent at 70 - 90°C and curing of the silicone rubber for 3 min at 150°C or 1 min at 180°C.

 

Adhesion of ELASTOSIL® RD 6600 F depends on substrate and can be varied by crosslinker type/amount and additives (e.g. CATALYST C05 or adhesion promoters). Preliminary testing should be carried out to determine optimum formulation and cure conditions.

Packaging

This product is available in 25 kg pails and 180 kg drum kits.

Storage

Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds.

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian 49221-9397
United States
+1  888  922-5374 (Phone)
+1 517 264-8246  (Fax)
Kontakt
Website

How can we help you?

    Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Please choose an application for viewing your product matches.