ELASTOSIL® Film 2030
ELASTOSIL® Film 2030 250/xxx is a high-precision silicone film made from cross-linked silicone rubber. The film shows a maximum thickness variation across the total width less than ±5%. The precision allows a constant electrical resistance and good comparative tracking resistance across a broad range of temperatures.
The width is 250 mm and thickness is given in μm (xxx). xxx stands for
- 20 µm
- 50 µm
- 100 µm
- 200 µm
- 300 µm
- 400 µm
ELASTOSIL® Film 2030 250/xxx is also available with a thickness of
- 10 µm and
- 15 µm.
The thickness variation over the entire width is +/- 1 µm. The production width is also 250 mm here.
Properties
ELASTOSIL® Film has got the outstanding mechanical and physical properties of platinum cured silicone.
- high and selectively gas and water vapor permeable
- high temperature resistant and low temperature flexible
- high dielectric strength combined with a high specific resistivity
- transparent
- constant mechanical and electrical properties over a wide range of temperatures and operating time
- solvent free
Specific features of ELASTOSIL® Film 2030
- Crosslinking Property: Addition Curing
- Resistance: Flexible at low (-40 °C) and high temperatures (+180 °C)
- Resistance: UV & weathering-resistant
- Specific Features: Addition Curing
- Specific Features: Colorless
- Specific Features: Electrically insulating
- Specific Features: Highly transparent
- Specific Features: Solvent-free
- Specific Features: UV & weathering-resistant
- Vulcanizate: Electrically insulating
- Vulcanizate: Excellent dielectrical properties
- Vulcanizate: Flexible at low (-40 °C) and high temperatures (+180 °C)
- Vulcanizate: Gas permeable
- Vulcanizate: Highly transparent
- Vulcanizate: Precise
Disclaimer
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Store in a dry and cool place.
- dielectric film in EAP applications for sensors, actuators and generators
- functional membranes
- optical layers / interlayers
- protective films
- functional packaging
ELASTOSIL® Film is manufactured and packed under cleanroom conditions, class 8.
Cutting and packing of film sheets is done in a clean environment, outside the cleanroom.
ELASTOSIL® Film is manufactured and packed under cleanroom conditions, class 8.
Cutting and packing of film sheets is done in a clean environment, outside the cleanroom.
Silicon Film can be glued to a numerous substrates with standard silicone adhesives. Depending on your requirements, ELASTOSIL® E43 can be the glue of choice.
Adhesion can generally be achieved and / or improved by using plasma boding.
Silicone Film can be processed by conventional technologies like die cutting, laser cutting or water jet cutting.
Packaging
ELASTOSIL® Film is always delivered on a PET carrier, either on rolls or as sheets.
Dimensions of film roll stock:
10 m² ≙ 40 running meter x 250 mm width
20 m² ≙ 80 running meter x 250 mm width
The roll stock is supplied with an inner diameter of 3"(≙ 7,62 cm)
Film sheets have the dimension 210 mm x 250 mm; delivery in boxes with 20 sheets each.
Storage
Minimum temperature allowed during storage and transportation: 0 °C
Maximum temperature allowed during storage and transportation: 80 °C
Sales and support
Adrian, MI 49221-9397
United States
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
More products
Please choose an application for viewing your product matches.