ELASTOSIL® E10 ROT is a one-component acetoxy-cure silicone rubber with low viscosity, which cures at room temperature under the influence of atmospheric moisture.

It shows good primerless adhesion to many substrates and outstanding heat stability even in long term exposure


  • Recommended service temperature from -45 °C to +230 °C

  • max. recommended short term peak temperature exposure 250°C

  • non-thixotropic

Specific features of ELASTOSIL® E10 ROT

  • Flowable
  • Heat resistant
  • Low viscosity
  • One-component
  • Solvent-free


All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

High temperature resistant grade for sealing, bonding and coating, use e.g. for sealing tubular heating elements 

ELASTOSIL® E10 ROT shows good primerless adhesion to many substrates. We recommend running preliminary tests to optimize conditions for the particular application.


Detailed processing instructions are given in our brochure “ROOM TEMPERATURE VULCANIZING (RTV) SILICONES - MATERIAL AND PROCESSING GUIDELINES


The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Tear strength Hardness Shore A Tensile strength Elongation at break
ELASTOSIL® E10 ROT 8.0 N/mm[1] 8.0 N/mm[1] 25[2] 25[2] 2.5 N/mm²[3] 2.5 N/mm²[3] 300 %[4] 300 %[4]
ELASTOSIL® N288 5.1 N/mm[1] 5.1 N/mm[1] 35[2] 35[2] 3.5 N/mm²[3] 3.5 N/mm²[3] 300 %[4] 300 %[4]
[1] Tear strength | ASTM D 624 B,  [2] Hardness Shore A | DIN ISO 48-4,  [3] Tensile strength | ISO 37 | Type 3 / 23°C / 2mm,  [4] Elongation at break | ISO 37 | Type 3 / 23°C / 2mm 


My media

My favorites

My products