ELASTOSIL® C1451
Silicone rubber base ELASTOSIL® C1451 is a 50 durometer self-lubricating material. The cured ELASTOSIL® C1451 exhibits good tensile, heat age and ASTM #3 oil immersion properties. It has been formulated to meet specific requirements of Ford's ESB-M2D280-A2, Chrylser's MS-AJ30-B and Sumitomo's SCI 504 engineering specifications.
Properties
This product can be used within a temperature range of - 55 °C to + 210 °C. The addition of heat stabilizers at service temperatures of more than 180 °C is recommended. Further information to improve the heat stability by use of specific ELASTOSIL® AUX Heat Stabilizers can be obtained from the Technical Information Sheet "ELASTOSIL® AUX Stabilizers H" or from the latest brochures.
Data sheets
Before it is vulcanized, 0.8 parts of Varox®, 2,5-di(tbutylperoxy)-2 ,5-dimethylhexane (45% active) per 100 parts of ELASTOSIL® C1451 should be added. Fabricating ELASTOSIL® C1451 can be fabricated using standard molding techniques.
Packaging
This product is available in 23 kg and 540 kg cardboard packaging.
Storage
Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
Ann Arbor, MI 48108
United States
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.