POWERSIL® 190 MH
POWERSIL® 190 MH is a 1-component, ready to use, peroxide curing silicone rubber compound that is designed specifically for use in high voltage applications. Insulators extruded and molded from POWERSIL® 190 MH possess excellent resistance to arcing and tracking, increasing the reliability and reducing power interruptions.
- good extrusion qualities
- very good arc resistance
- suitable dielectric properties
- good mechanical properties
- offers good weathering resistance
Specific features of POWERSIL® 190 MH
- Resistance: Resistant to tracking and erosion
- Specific Features: Excellent hydrophobicity behavior
- Specific Features: Resistant to tracking and erosion
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
POWERSIL® 190 MH silicone rubber is a good choice for manufacturing all types of electrical insulating equipment for outdoor use, e.g. composite insulators, arresters housings, bushings etc..
More information can be found in the brochure “Solutions for the Transmission and Distribution Technology”.
POWERSIL® 190 MH is especially designed for processing by extrusion technologies. But it can also be processed by compression, transfer or injection moulding techniques. For optimal bonding of POWERSIL® 190 MH to FRP substrates the use of Primer G 3243 is recommended.
For detailed information about processing please refer to the brochure ELASTOSIL® HTV-Silicone Rubber - Processing.
Further information for storage: Store in a dry and cool place.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Would you like a product sample?
You can request a product sample here.Request sample
|Appearance||Hardness Shore A||Tensile strength||Elongation at break||Tear strength|
|POWERSIL® 310 MH||light gray, dark gray light gray, dark gray||70 70||5.0 N/mm² 5.0 N/mm²||200 % 200 %||11 N/mm 11 N/mm|
|POWERSIL® 3100 MH||light gray light gray||70 70||4.5 N/mm² 4.5 N/mm²||350 % 350 %||20 N/mm 20 N/mm|
|POWERSIL® 311 MH||light gray light gray||80 80||4.0 N/mm² 4.0 N/mm²||100 % 100 %||10 N/mm 10 N/mm|
 Hardness Shore A | DIN ISO 48-4,  Tensile strength | ISO 37 type 1,  Elongation at break | ISO 37 type 1,  Tear strength | ASTM D 624 B