This product is not available in United States. Please use the product search or contact us.

GENIOSIL® N35 CN

GENIOSIL® N35 CN is one part, neutral-curing, new hybrid silicone sealant for general use. GENIOSIL® N35 CN could be used as anti-fungi adhesive in home decoration field.

GENIOSIL® N35 CN cures at room temperature in the presence of atmospheric moisture to give a permanent middle-flexible rubber.

GENIOSIL® N35 CN hybrid sealant exhibits excellent adhesion to most substrate. Can be widely used in elastic sealing field.


Properties

•  Low odor

•  Isocyanate-free

•  Ready gunnability at low (+5°C) and high (+40°C) temperatures

•  Flexible at low (-40°C) and high temperatures (+120°C)

•  Primerless adhesion to most materials

•  Non-corrosive and non-staining to substrate

•  Paintable

•  Can be polished and paintable

•  Mold retardant

Application

 

 

GENIOSIL® N35 CN hybrid sealant is ideal, general used sealant with rapid crosslink speed, especially suitable for home decoration field that need sanitary applications.    

GENIOSIL® N35 CN hybrid sealant can be used for bonding and sealing of almostall surfaces and substrates. Can widely used in the adhesion to glass, metals, plastics, concrete, or mineral-based substrate.

 

The curing time can be extended at lower temperature, lower humidity or by low volume of air exchange.

 

Preparation

 

 

The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material, dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and a clean, lint-free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

Packaging

GENIOSIL® N35 CN is usually supplied in standard size cartridges that fit all standard caulking guns.

Storage

The 'Best use before end' date of each batch is shown on the product label. 

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Distributors

WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.

Brenntag North America
5083 Pottsville Pike
19605 Reading
1  6109266100 (Phone)
1 6109163782  (Fax)
Contact distributor Website

More products

Products Technical data
Viscosity, dynamic Movement capability 抗位移能力 Flash point Skin Density Amine number Modulus at 100 % elongation
CROSSLINKER BO 30 - - - - - - - - - - - - - - - -
CROSSLINKER BO 32 - - - - - - - - - - - - - - - -
CROSSLINKER BO 35 - - - - - - - - - - - - - - - -
CROSSLINKER BO 38 - - - - - - - - - - - - - - - -
ELASTOSIL® 4000 - - - - 25 %[1] 25 %[1] - - 20 min[6] 20 min[6] 1.02 g/cm³[9] 8.512 lb/gal[9] - - 0.35 N/mm²[11] 0.35 N/mm²[11]
ELASTOSIL® 4003 - - - - - - - - - - 0.97 - 1.02 g/cm³[10] 8.095 - 8.512 lb/gal[10] - - 0.36 - 0.39 N/mm²[12] 0.36 - 0.39 N/mm²[12]
ELASTOSIL® 4100 - - - - 25 %[1] 25 %[1] - - 20 min[6] 20 min[6] 1.02 g/cm³[9] 8.512 lb/gal[9] - - 0.35 N/mm²[11] 0.35 N/mm²[11]
ELASTOSIL® 4300 - - - - - - - - 15 min[6] 15 min[6] 1.03 g/cm³[9] 8.596 lb/gal[9] - - 0.55 N/mm²[11] 0.55 N/mm²[11]
ELASTOSIL® 4500 - - - - 25 %[2] 25 %[2] - - 20 min[6] 20 min[6] 1.03 g/cm³[9] 8.596 lb/gal[9] - - 0.45 N/mm²[11] 0.45 N/mm²[11]
ELASTOSIL® 4710 - - - - 25 %[2] 25 %[2] - - 15 min[6] 15 min[6] 1.03 g/cm³[9] 8.596 lb/gal[9] - - 0.37 N/mm²[11] 0.37 N/mm²[11]
ELASTOSIL® 5000 - - - - 25 %[1] 25 %[1] - - 20 min[7] 20 min[7] 1.01 g/cm³[9] 8.429 lb/gal[9] - - 0.38 N/mm²[11] 0.38 N/mm²[11]
ELASTOSIL® 5010 - - - - 25 %[1] 25 %[1] - - 20 min[7] 20 min[7] 1.01 g/cm³[9] 8.429 lb/gal[9] - - 0.38 N/mm²[11] 0.38 N/mm²[11]
ELASTOSIL® 5100 - - - - 25 %[1] 25 %[1] - - 20 min[6] 20 min[6] 1.01 g/cm³[9] 8.429 lb/gal[9] - - 0.38 N/mm²[11] 0.38 N/mm²[11]
ELASTOSIL® 6000 - - - - 12.5 %[2] 12.5 %[2] - - 25 min[6] 25 min[6] 0.98 g/cm³[9] 8.178 lb/gal[9] - - 0.36 N/mm²[11] 0.36 N/mm²[11]
ELASTOSIL® 6100 - - - - 12.5 %[2] 12.5 %[2] - - 25 min[6] 25 min[6] 0.98 g/cm³[9] 8.178 lb/gal[9] - - 0.36 N/mm²[11] 0.36 N/mm²[11]
ELASTOSIL® 7000 N - - - - 25 %[1] 25 %[1] - - 25 min[6] 25 min[6] 1.03 g/cm³[9] 8.596 lb/gal[9] - - 0.38 N/mm²[11] 0.38 N/mm²[11]
ELASTOSIL® 7100 P - - - - 25 %[1] 25 %[1] - - 25 min[6] 25 min[6] 1.03 g/cm³[9] 8.596 lb/gal[9] - - 0.38 N/mm²[11] 0.38 N/mm²[11]
ELASTOSIL® 7150 P - - - - 25 %[2] 25 %[2] - - 15 min[8] 15 min[8] 1.02 g/cm³[9] 8.512 lb/gal[9] - - 0.35 N/mm²[11] 0.35 N/mm²[11]
ELASTOSIL® 7750 N - - - - 50 %[3] 50 %[3] - - 20 min[6] 20 min[6] 1.40 g/cm³[9] 11.684 lb/gal[9] - - 0.40 N/mm²[11] 0.40 N/mm²[11]
ELASTOSIL® 8000 N - - 35 %[4] 35 %[4] - - - - 25 min[6] 25 min[6] 1.02 g/cm³[9] 8.512 lb/gal[9] - - 0.37 N/mm²[11] 0.37 N/mm²[11]
ELASTOSIL® 8100 P - - 35 %[4] 35 %[4] - - - - 25 min[6] 25 min[6] 1.02 - 1.03 g/cm³[9] 8.512 - 8.596 lb/gal[9] - - 0.37 N/mm²[11] 0.37 N/mm²[11]
ELASTOSIL® 8510 P - - 25 %[5] 25 %[5] - - - - 15 min[8] 15 min[8] 1.02 g/cm³[9] 8.512 lb/gal[9] - - 0.35 N/mm²[11] 0.35 N/mm²[11]
ELASTOSIL® 9000 N - - 12.5 %[5] 12.5 %[5] - - - - 25 min[6] 25 min[6] 1.00 g/cm³[9] 8.345 lb/gal[9] - - 0.37 N/mm²[13] 0.37 N/mm²[13]
ELASTOSIL® 9100 P - - 12.5 %[5] 12.5 %[5] - - - - 25 min[6] 25 min[6] 1.0 g/cm³[9] 8.345 lb/gal[9] - - 0.37 N/mm²[11] 0.37 N/mm²[11]
ELASTOSIL® eco 7770 P - - 25 %[5] 25 %[5] - - - - 15 min[8] 15 min[8] 1.02 g/cm³[9] 8.512 lb/gal[9] - - 0.35 N/mm²[11] 0.35 N/mm²[11]
ELASTOSIL® eco 8510 P - - 25 %[5] 25 %[5] - - - - 15 min[8] 15 min[8] 1.02 g/cm³[9] 8.512 lb/gal[9] - - 0.35 N/mm²[11] 0.35 N/mm²[11]
ELASTOSIL® K760 C - - ± 50 %[4] ± 50 %[4] - - - - 20 min[6] 20 min[6] 1.40 g/cm³[9] 11.684 lb/gal[9] - - 0.40 N/mm²[11] 0.40 N/mm²[11]
WACKER® ADHESION PROMOTER AMS 60 20 - 40 mPa·s 20 - 40 mPa·s - - - - > 100 °C > 212 °F - - - - - - - -
WACKER® ADHESION PROMOTER AMS 61 approx. 100 mPa·s approx. 100 mPa·s - - - - > 100 °C > 212 °F - - - - - - - -
WACKER® ADHESION PROMOTER AMS 68 - - - - - - 48 °C 118.4 °F - - - - approx. 2.5 approx. 2.5 - -
WACKER® ADHESION PROMOTER AMS 70 approx. 7 mPa·s approx. 7 mPa·s - - - - 55 °C 131 °F - - - - - - - -
WACKER® ADHESION PROMOTOR AMS 50 15 - 40 mPa·s 15 - 40 mPa·s - - - - > 100 °C > 212 °F - - - - - - - -
WACKER® CATALYST 41 - - - - - - 38 °C 100.4 °F - - - - - - - -
WACKER® CATALYST AL-T 2 - 5 mPa·s 2 - 5 mPa·s - - - - approx. 10 °C approx. 50.0 °F - - - - - - - -
WACKER® CATALYST C 88 - - - - - - 48 °C 118.4 °F - - - - - - - -
WACKER® CROSSLINKER ME 60 - - - - - - 11 °C 51.8 °F - - - - - - - -
WACKER® CROSSLINKER ME 63 - - - - - - 11 °C 51.8 °F - - - - - - - -
WACKER® ELASTOMER 20 N - - - - - - - - - - - - - - - -
WACKER® ELASTOMER 350 N 300000 mPa·s 300000 mPa·s - - - - > 149 °C > 300.2 °F - - - - - - - -
WACKER® ELASTOMER 50 N 50000 mPa·s 50000 mPa·s - - - - > 149 °C > 300.2 °F - - - - - - - -
WACKER® ELASTOMER 80 N 75000 - 80000 mPa·s 75000 - 80000 mPa·s - - - - > 149 - 263 °C > 300.2 - 505.4 °F - - - - - - - -
WACKER® GA (2) - - 20 %[5] 20 %[5] - - - - - - 1.01 g/cm³[10] 8.429 lb/gal[10] - - - -
WACKER® PLASTICIZER 100 95 - 105 mPa·s 95 - 105 mPa·s - - - - - - - - - - - - - -
WACKER® PLASTICIZER 1000 approx. 1000 mPa·s approx. 1000 mPa·s - - - - 348 °C 658.4 °F - - - - - - - -
WACKER® PLASTICIZER 1000 LV 1000 mPa·s 1000 mPa·s - - - - 240 - 265 °C 464 - 509 °F - - - - - - - -
WACKER® PLASTICIZER MH 30 15 - 50 mPa·s 15 - 50 mPa·s - - - - approx. 120 °C approx. 248 °F - - - - - - - -
WACKER® POLYMER AL 08 approx. 8000 mPa·s approx. 8000 mPa·s - - - - 83 °C 181.4 °F - - - - - - - -
WACKER® POLYMER AL 100 approx. 100000 mPa·s approx. 100000 mPa·s - - - - 90 °C 194 °F - - - - - - - -
WACKER® POLYMER AL 110 approx. 110000 mPa·s approx. 110000 mPa·s - - - - 90 °C 194 °F - - - - - - - -
WACKER® POLYMER AL 55 M approx. 57000 mPa·s approx. 57000 mPa·s - - - - 90 °C 194 °F - - - - - - - -
WACKER® POLYMER AL 60 approx. 60000 mPa·s approx. 60000 mPa·s - - - - 90 °C 194 °F - - - - - - - -
WACKER® POLYMER FD 120 approx. 120000 mPa·s approx. 120000 mPa·s - - - - - - - - - - - - - -
WACKER® POLYMER FD 20 approx. 20000 mPa·s approx. 20000 mPa·s - - - - - - - - - - - - - -
WACKER® POLYMER FD 350 approx. 305000 mPa·s approx. 305000 mPa·s - - - - - - - - - - - - - -
WACKER® POLYMER FD 50 approx. 50000 mPa·s approx. 50000 mPa·s - - - - - - - - - - - - - -
WACKER® POLYMER FD 80 approx. 75000 mPa·s approx. 75000 mPa·s - - - - - - - - - - - - - -
Legend
[1] 抗位移能力 | ISO 11600 / EN 15651,  [2] 抗位移能力 | ISO 11600,  [3] 抗位移能力 | ASTM C920,  [4] Movement capability | ASTM C920,  [5] Movement capability | ISO 11600,  [6] Skin forming time | 23 °C | 50 % r.h ,  [7] Skin Skin forming time | 23 °C | 50 % r.h ,  [8] Skin formating time | 23 °C | 50 % r.h ,  [9] Density | 23 °C | ISO 1183-1 A,  [10] Density | ISO 1183-1 A,  [11] Modulus at 100 % elongation | ISO 8339-A,  [12] Modulus at 100 % elongation | ISO 37,  [13] Modulus at 100 % elongation | ISO 8339 

Order

My media


Go to order form

Sales Contact

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 (Phone)

My favorites

My products