ELASTOSIL® VARIO 15
Pourable, addition-curing two-component silicone rubber that vulcanizes at room temperature.
Can be blended with ELASTOSIL® VARIO 40 to achieve any target hardness between 15 and 40 Shore A.
See our flyer:
"ELASTOSIL® VARIO MODULAR ADDITION CURING SYSTEM"
Properties
- Two base components, two catalysts
- Easy to process because of low viscosity
- Fast and non-shrink cure at room temperature, adjustable over a wide range
- Low hardness 15 Shore A
- High elongation, outstanding tensile strength
- Excellent tear strength
- Cured rubber is translucent and colorless
- Can be pigmented with 1 - 4 % ELASTOSIL® Pigment Pastes FL
Specific features of ELASTOSIL® VARIO 15
- Addition Curing
- BfR compliant
- FDA compliant
- Flowable
- Food-contact
- Low viscosity
- No chemical shrinkage
- Two-component
Data sheets
Due to its resistance to all common reproduction materials. e.g. casting resins, concrete, plaster, as well as the mechanical properties, ELASTOSIL® VARIO 15 is especially suitable for all molds.
As a low Shore A addition silicone rubber that cures without undergoing dimensional shrinkage, ELASTOSIL® VARIO 15 is also suitable if absolutely accurate copies of models are required.
Storage
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
Ann Arbor, MI 48108
United States
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.