ELASTOSIL® LR 3093/65 A/B
Liquid silicone rubber ELASTOSIL® LR 3093/65 A/B is a paste-like two-component compound with short curing times. The vulcanizates are noted for good mechanical properties and for excellent heat resistance within a temperature range of -55 °C to +225 °C, and for a short time up to +300 °C. Outstanding ultra low compression sets can be achieved after post curing 4h at 210°C.
ELASTOSIL® LR 3093/65 contains a black heat stabilizer and therefore provides very good heat resistance. Vulcanizates show extremely low compression set after post-curing.
Spezifische Merkmale von ELASTOSIL® LR 3093/65 A/B
- Reduzierter Flüchtigengehalt
- sehr niedriger Druckverformungsrest
The A and B components are delivered ready to use in 20 kg pail and 200 kg drum kits. With adequate metering equipment, they can be pumped directly from the original containers into the injection molding machine and mixed by a static mixer. The mixing ratio is 1 : 1. At room temperature, mixtures of A and B components have a pot life of at least three days.
For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".
Verpackung / Gebinde
This product is available in 20 kg pail and 200 kg drum kits.
Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.