ELASTOSIL^® RT 685 A/B

Some fillers may settle during transport and storage. To ensure a uniform mix, the component A should be stirred thoroughly prior to use.


To prepare ready-to-use mixtures, the components should mixed well.


Small amounts can be mixed by hand or mechanically (e. g. power tool fitted with mixing blade) for at least 30 seconds.


Colours may be obtained by addition of 3-5 % Pigment Paste FL if desired. After addition the material has to be mixed carefully.


Note:
Certain substances can inhibit the curing process to a greater or lesser extent. The most notable include:

 

•  Sulphur and sulphur-containing materials (e. g. vulcanizing agents in natural and synthetic rubbers)
•  Amines, urethanes and amine-containing materials (e. g. amine-cured epoxy resins)
•  Unsaturated hydrocarbons (e. g. certain plasticizers)
•  Organo-metallic compounds, particularly organo-tin compounds and materials containing such substances (e. g. curing agents and condensation-cured RTV-2 silicone rubbers).

If in doubt carry out preliminary tests to ascertain the compatibility of all materials in contact with the catalysed mix. Liquid product or sticky surfaces indicate cure inhibition. Our technical service will be glad to give you information on how to prevent such problems.

Lagerung

Das Mindesthaltbarkeitsdatum der jeweiligen Charge ist auf dem Produktetikett angegeben. Eine Lagerung über den auf dem Produktetikett angegebenen Zeitraum hinaus bedeutet nicht notwendigerweise, dass die Ware unbrauchbar ist. Eine Überprüfung der für den jeweiligen Einsatzzweck erforderlichen Eigenschaftswerte ist jedoch in diesem Falle aus Gründen der Qualitätssicherung unerlässlich.