This product is not available in United States. Please use the product search or contact us.

WACKER® GP - GENERAL PURPOSE

WACKER® GP - GENERAL PURPOSE is a one-component, acid-curing, silicone sealant for general purpose sealing.

WACKER® GP - GENERAL PURPOSE cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.



Properties

  •  rapid crosslinking: quickly becomes tack-free
  •  adheres excellently to glass, vitrified surfaces, ceramic tiles, selected plastics and most coatings
  •  non-sag
  •  ready gunnability at low (+ 5 °C) and high (+ 40 °C) temperatures
  •  flexible at low (- 40 °C) and high temperatures (+ 100 °C)

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

Application fields

  • DIY applications (car, boat, caravan, house)
  • Suitable for many general industrial sealing and bonding uses

 

Processing

The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material such as dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and a clean, lint-free, cotton cloth. Remove residual solvent before it evaporates with a fresh clean, dry cloth.

For application from cartridges cut thread open, fix nozzle on top and cut to required bead size. The sealant can be applied in beads or layers. It requires moisture in order to cure.
The curing time can take longer at lower temperatures, lower humidity or by low volume of air exchange.

 

Adhesion

WACKER® GP - GENERAL PURPOSE exhibits excellent primerless adhesion to many non-porous siliceous materials, e.g. glass, tiles, ceramics, enamel, glazed tiles and clinker varnished or painted wood as well as selected plastics and coatings

Users must carry out their own tests due to the great variety of substances. The adhesion can be improved in many cases by pretreatment of the substrates with a primer. If adhesion difficulties arise please contact our technical service.

 

Restrictions on use

It is the user's responsibility to test the compatibility of the sealant with the adjoining materials. Incompatible substances like coating materials (paints, varnishes and glazes) or organic plasticizer containing rubbers (EPDM, butyl and neoprene) can lead to discoloration or other impairments like loss of adhesion of the sealant. Materials in direct contact with the applied sealant like cleaning agents and materials in indirect contact like gaseous emissions can damage the sealant in its function or change its appearance. Because of the multitude of these materials. Wacker cannot make a general statement to the compatibility of materials with the sealant. In case of doubt the user shall conduct appropriate preliminary tests.

WACKER® GP - GENERAL PURPOSE must not be used for insulating glass applications.

WACKER® GP - GENERAL PURPOSE should not be used on substrates such as concrete, fibrous cement, and mortar, as the product releases acetic acid during vulcanization.

WACKER® GP - GENERAL PURPOSE should not be used in contact with metals such as lead, copper, brass or zinc due to corrosion.

WACKER® GP - GENERAL PURPOSE should not be used in contact with prestressed polyacrylate elements as it may cause stress cracking.

WACKER® GP - GENERAL PURPOSE may be discolored in contact with some organic elastomers, e.g. EPDM, APTK and neoprene.

WACKER® GP - GENERAL PURPOSE must not be used for sealing of aquaria. WACKER® 121 - AQUARIUM has been specifically developed for aquarium applications.

WACKER® GP - GENERAL PURPOSE is not recommended for use on natural stone, such as marble, granite, quartzite, as it can cause staining. In this case use an alternative grade such as WACKER® 460 - NATURAL STONE.

WACKER® GP - GENERAL PURPOSE is not recommended for structural glazing bonding.

WACKER® GP - GENERAL PURPOSE is not recommended for sealing of aquaria or for longer-term use under water. WACKER® 120 – FOOD AND WATER has been specifically developed for aquarium applications.

WACKER® GP - GENERAL PURPOSE is not suitable for food grade applications where the joints are likely to come in contact with food.

WACKER® GP - GENERAL PURPOSE is not suitable for use as a mirror adhesive.

The time until complete curing may be extended at lower temperature, lower humidity, increasing film thickness or by low volume of air exchange.

The use of tooling agents should be avoided if possible. Otherwise, water or a diluted solution of a little neutral soap or alcohol in water should be sparingly applied.

Storage

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Please choose an application for viewing your product matches.

Order

My media


My favorites

My products