ELASTOSIL® 7750 N

ELASTOSIL® 7750 N is a one-component, neutral-curing, fire retardant, low modulus silicone sealant with outstanding adhesion, long shelf life and excellent tooling characteristics for construction, glass and window building, as well as industrial applications.

ELASTOSIL® 7750 N cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.



Properties

  • 100% silicone
  • excellent weatherability
  • excellent tooling characteristics for professional use
  • non-corrosive to metals
  • suitable for alkaline substrates such as concrete, mortar, fibrous cement
  • matt finish
  • excellent adhesion on most substrates without primer
  • solvent-free, thus featuring low volume shrinkage during vulcanization
  • ready gunnability at low (+ 5 °C) and high (+ 40 °C) temperatures
  • flexible at low (-40 °C) and high temperatures (+150 °C)
  • almost odorless
  • non-sag

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

Application fields

  • sealing of connection and expansion joints in the building industry
  • sealing of perimeter joints
  • sealing of joints between glazing and supporting structures (frames, transoms, mullions)
  • Industrial application as sealant in the automotive, aircraft and shipbuilding industries

 

Processing

The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material, dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and a clean, lint-free, cotton cloth. Remove residual solvent before it evaporates with a fresh clean, dry cloth.

It is the responsibility of the user to test the compatibility of the sealant with the adjoining materials. Incompatible substances like coating materials (paints, varnishes and glazes) or organic plasticizer containing rubbers (EPDM, butyl and neoprene) can lead to discoloration or other impairments like loss of adhesion of the sealant. Materials in direct contact with the applied sealant like cleaning agents and materials in indirect contact like gaseous emissions can damage the sealant in its function or change its appearance. Because of the multitude of these materials, Wacker cannot make a general statement to the compatibility of materials with the sealant. In case of doubt the user shall conduct appropriate preliminary tests.

The time until complete curing may be extended at lower temperature, lower humidity, increasing film thickness or by low volume of air exchange.

 

Certification

ELASTOSIL® 7750 N is certified and classified according to

  • EN 15651-1, Class 25LM F-EXT-INT-CC
  • EN 15651-2, Class 25LM G-CC
  • EN 15651-4, Class 25LM PW-EXT-INT-CC
  • SNJF F&G, Class 25E
  • ASTM C920, Class 50/50
  • EMIDODE EC1 PLUS

 

Adhesion

 ELASTOSIL® 7750 N exhibits excellent primerless adhesion to many substrates, e.g. glass, tiles, ceramics, enamel, glazed tiles and clinker e.g. aluminium, steel, zinc or copper wood, and many plastics.

Users must carry out their own tests due to the great variety of substances. The adhesion can be improved in many cases by pretreatment of the substrates with a primer. If adhesion difficulties arise please contact our technical service.


Restrictions on use

ELASTOSIL® 7750 N must not be used for insulating glass applications

ELASTOSIL® 7750 N must not be used for structural glazing bonding

ELASTOSIL® 7750 N is not recommended for use on natural stones, such as marble, granite, or quartzite, as it can cause staining

ELASTOSIL® 7750 N is not recommended for sealing of aquaria or for longerterm use under water

ELASTOSIL® 7750 N is not suitable for food grade applications where the joints are likely to come in contact with food

ELASTOSIL® 7750 N is not suitable for use as a mirror adhesive

Storage

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian 49221-9397
United States
+1  888  922-5374 (Phone)
+1 517 264-8246  (Fax)
Kontakt
Website

How can we help you?

    Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

More products

Please choose an application for viewing your product matches.