ELASTOSIL® AUX FL NON-HEALING LV
ELASTOSIL® AUX FL NON-HEALING LV is a ready-to-use masterbatch comprising specific additives and reactive silicone polymers which are commonly used in ELASTOSIL® liquid silicone rubber. This ensures a homogeneous covulcanization without migration as it may be observed for systems based on silicone oil.
ELASTOSIL® AUX FL NON-HEALING LV can be used to reduce self-healing and other sticking phenomena.
ELASTOSIL® AUX FL NON-HEALING LV can be used to prevent self-healing issues and other sticking phenomena. It is ready-to-use after brief stirring before use. ELASTOSIL® AUX FL NON-HEALING LV has a lower viscosity and improved processability compared to ELASTOSIL® AUX FL NON-HEALING.
Specific features of ELASTOSIL® AUX FL NON-HEALING LV
- BfR compliant
- FDA compliant
- Low volatile
ELASTOSIL® AUX FL NON-HEALING LV may be used for manufacture of parts intended for sensitive applications and complying with the “Recommendation XV. Silicones" of the BfR and FDA Regulation CFR 21 § 177.2600 "Rubber Articles Intended for Repeated Use" under observance of any given limitations on extractable and volatile substances. Please see the actual Product Compliance Sheet of this product and/or the separate Food Contact Statement for detailed information about food contact including information about any limitation in view of dosage and/or condition of use that may apply for this product. A statement regarding biocompatibility according to USP<88> class VI and selected tests of ISO 10993 is available on request.
Dosing of 1-4 % of ELASTOSIL® AUX FL NON HEALING LV via the color line of the dosing unit is recommended. It must be thoroughly stirred before use. This is also necessary if there has been a long interruption in production.
This product is available in 20 kg pail and 1kg tin.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case however, the properties required for the intended use must be checked for quality assurance reasons.