POWERSIL® 600 A/B
POWERSIL® 600 A/B is a pourable, addition-curing, two-component silicone rubber that cures at room temperature to form soft products with high mechanical strength.
- castable RTV-2
- ready-to-use, two component system
- very easy to process due to its low viscosity
- excellent dielectric properties
- best suitable for outdoor applications (UV & weathering resistance, excellent hydrophobic properties)
Specific features of POWERSIL® 600 A/B
- Resistant to tracking and erosion
- cable accessories
Components A and B are delivered ready to use in drums of 20 and 200 litres capacity. They can be pumped by means of standard metering equipment from these drums and mixing in a static mixer straight into the mold. The mixing ratio is 9 : 1.
The extreme low viscosity and resulting high volumetric flow rate ensure consistent, void-free production at room temperature. Curing at room temperature results in very little inner mould pressure. Therefore POWERSIL® 600 A/B is suitable for the production of products with complex installation parts.
At room temperature, mixtures of A and B components have a pot life of at least 70 minutes.
POWERSIL® 600 A/B is also recommended for prototyping of products since no expensive machinery is needed for its processing.
Detailed information on processing of POWERSIL® 600 A/B is given in brochure “Processing RTV-2 Silicone Rubbers”.