ELASTOSIL® M 4644 A/B

$ELASTOSIL<sup>®</sup> M 4644 A/B

Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.

 

Main application: Vacuum casting for rapid prototyping.



Properties

  • good flow
  • fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
  • medium Shore A hardness (approx. 40)
  • good transparency of the cured rubber
  • high tear strength
  • outstanding resistance to casting resins, particularly polyurethanes and epoxies, for very long service life of the molds
  • slightly oil-bleeding

Specific features of ELASTOSIL® M 4644 A/B

  • Crosslinking Property: Two-component
  • Product Type: Two-component
  • Specific Features: Excellent mechanical properties
  • Specific Features: Two-component
  • Surface property: Slightly oil bleeding
  • Vulcanizate: Excellent mechanical properties

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

High-performance silicone mold-making compound which is particularly suitable for reproducing models with undercuts in polyurethane or epoxy resins.


Main field of application: Vacuum casting for rapid prototyping.

Important note:

The platinum catalyst is in component A.

Important:

A and B components may only be used together if they have the same batch number.
 

Bitte beachten Sie auch unsere Broschüren und Informationsblätter. 

 

Storage

The 'Best use before end' date of each batch is shown on the product label.

 

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Viscosity, dynamic Tear strength Hardness Shore A Tensile strength Elongation at break
ELASTOSIL® M 4641 A/B 50000 mPa·s[1] - > 25 N/mm[4] > 25 N/mm[4] 43[5] 43[5] > 4.5 N/mm²[6] > 4.5 N/mm²[6] > 300 %[7] > 300 %[7]
ELASTOSIL® M 4644 A/B 70000 mPa·s[1] - > 25 N/mm[4] > 25 N/mm[4] 40[5] 40[5] 5.5 N/mm²[6] 5.5 N/mm²[6] 400 %[7] 400 %[7]
ELASTOSIL® M 4645 A/B 50000 mPa·s[1] - > 28 N/mm[4] > 28 N/mm[4] 40[5] 40[5] 5 N/mm²[6] 5 N/mm²[6] 330 %[7] 330 %[7]
ELASTOSIL® M 4670 A/B 120000 mPa·s[1] - > 12 N/mm[4] > 12 N/mm[4] 55[5] 55[5] 5.5 N/mm²[6] 5.5 N/mm²[6] 250 %[7] 250 %[7]
ELASTOSIL® VARIO 15 5.000 mPa·s[2] - 15[4] 15[4] 15[5] 15[5] 6.5 N/mm²[6] 6.5 N/mm²[6] 900 %[7] 900 %[7]
ELASTOSIL® VARIO 40 15.000 mPa·s[3] 15.000 mPa·s[3] 15 N/mm[4] 15 N/mm[4] 40[5] 40[5] 8[6] 8[6] 450 %[7] 450 %[7]
Legend
[1] Viscosity, dynamic after stirring | 23 °C | ISO 3219,  [2] Viscosity, dynamic 23°C, stirred | ISO 3219,  [3] Viscosity, dynamic 23° C, stirred | ISO 3219,  [4] Tear strength | ASTM D 624 B,  [5] Hardness Shore A | ISO 868,  [6] Tensile strength | ISO 37,  [7] Elongation at break | ISO 37 

Order

My media


My favorites

My products