ELASTOSIL® E92 N TRANSPARENT
ELASTOSIL® E92 N TRANSPARENT is a transparent self-levelling silicone rubber with very good mechanical properties, which cures at room temperature under the influence of atmospheric moisture.
- titanium-based catalyst system
- high elongation properties
- acetic acid-curing system
- excellent primer less adhesion to many substrates
Specific features of ELASTOSIL® E92 N TRANSPARENT
- High elongation
- Primerless adhesion to most substrates
- Ready to use
- Tin-free catalysis
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Multipurpose glue and for textile coatings, e.g. antislip coatings
ELASTOSIL® E92 N TRANSPARENT shows good primerless adhesion to many substrates. We recommend running preliminary tests to optimize conditions for the particular application. The one component rubber can be easily extruded and cures at room temperature under the influence of atmospheric moisture.
Skin forming time at 23°C / 50% rH: about 10 min
Curing time at 23°C / 50% rH: 12 h/mm
This product is available in 310 g cartridges, 20 kg pails and 200 kg drum kits.
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Would you like a product sample?
You can request a product sample here.Request sample
|Appearance||Density||Elongation at break||Hardness Shore A||Tensile strength||Viscosity, dynamic|
|ELASTOSIL® E91 TRANSPARENT||colorless colorless||1.07 g/cm³ 8.93 lb/gal||350 % 350 %||20 20||1.2 N/mm² 1.2 N/mm²||125000 mPa·s 125000 mPa·s|
|ELASTOSIL® E92 N TRANSPARENT||colorless colorless||1.07 g/cm³ 8.93 lb/gal||350 % 350 %||20 20||1.5 N/mm² 1.5 N/mm²||115000 mPa·s 115000 mPa·s|
 Density | 23 °C | DIN EN ISO 1183-1 A,  Viscosity, dynamic (0.5 s⁻¹) | 25 °C | DIN EN ISO 3219,  Hardness Shore A | ISO 7619-1,  Tensile strength | ISO 37 type 1,  Elongation at break | ISO 37 type 1