POWERSIL® 732 CS A/B
POWERSIL® 732 CS A/B is a two-component, liquid silicone rubber with excellent processing properties. Its vulcanizates are noted for their excellent mechanical and electrical properties. POWERSIL® 732 CS A/B is especially designed for cold shrink applications.
Properties
- ready-to-use, two-component system
- very easy to process
- transparent thus colorable
- excellent dielectric properties
- best suitable for outdoor applications (UV & weathering resistance, excellent hydrophobic properties)
Specific features of POWERSIL® 732 CS A/B
- Resistance: Resistant to tracking and erosion
- Specific Features: Cold-shrinkable
- Specific Features: Resistant to tracking and erosion
Disclaimer
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
- cold shrinkable cable accessories
- outdoor and indoor use
Components A and B are delivered ready to use in drums of 20 and 200 litres capacity. They can be pumped by means of standard metering equipment from these drums and mixing in a static mixer straight into the heated mold.
The mixing ratio is 1 : 1. At room temperature, mixtures of A and B components have a pot life of at least three days. For detailed information, refer to brochures on www.wacker.com.
Storage
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
Adrian, MI 49221-9397
United States
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
More products
| Products | Technical data | |||||
|---|---|---|---|---|---|---|
| Appearance | Hardness Shore A | Tensile strength | Elongation at break | Tear strength | Compression Set | |
| ELASTOSIL® LR 3002/35 A/B | colourless colourless | 33[1] 33[1] | 7.0 N/mm²[2] 7.0 N/mm²[2] | 460 %[3] 460 %[3] | 25 N/mm[4] 25 N/mm[4] | - - |
| ELASTOSIL® LR 3003/20 TR A/B | transparent transparent | 22[1] 22[1] | 8.3 N/mm²[2] 8.3 N/mm²[2] | 870 %[3] 870 %[3] | 24 N/mm[4] 24 N/mm[4] | 17 %[5] 17 %[5] |
| ELASTOSIL® LR 3003/30 A/B | transparent transparent | 31[1] 31[1] | 7.5 N/mm²[2] 7.5 N/mm²[2] | 620 %[3] 620 %[3] | 23 N/mm[4] 23 N/mm[4] | 10 %[5] 10 %[5] |
| ELASTOSIL® LR 3003/40 A/B | transparent transparent | 40[1] 40[1] | 10.0 N/mm²[2] 10.0 N/mm²[2] | 610 %[3] 610 %[3] | 30 N/mm[4] 30 N/mm[4] | 11 %[5] 11 %[5] |
| ELASTOSIL® LR 3003/50 A/B | transparent transparent | 50[1] 50[1] | 10.3 N/mm²[2] 10.3 N/mm²[2] | 490 %[3] 490 %[3] | 28 N/mm[4] 28 N/mm[4] | 13 %[5] 13 %[5] |
| ELASTOSIL® LR 3003/60 A/B | transparent transparent | 60[1] 60[1] | 9.5 N/mm²[2] 9.5 N/mm²[2] | 340 %[3] 340 %[3] | 27 N/mm[4] 27 N/mm[4] | 12 %[5] 12 %[5] |
| ELASTOSIL® LR 3003/70 A/B | transparent transparent | 70[1] 70[1] | 8.6 N/mm²[2] 8.6 N/mm²[2] | 290 %[3] 290 %[3] | 20 N/mm[4] 20 N/mm[4] | 12 %[5] 12 %[5] |
| ELASTOSIL® LR 3004/40 A/B | transparent transparent | 40[1] 40[1] | 10.0 N/mm²[2] 10.0 N/mm²[2] | 610 %[3] 610 %[3] | 35 N/mm[4] 35 N/mm[4] | 10 %[5] 10 %[5] |
| ELASTOSIL® LR 3005/60 A/B | transparent transparent | 60[1] 60[1] | 9.5 N/mm²[2] 9.5 N/mm²[2] | 380 %[3] 380 %[3] | 28 N/mm[4] 28 N/mm[4] | 18 %[6] - |
| ELASTOSIL® LR 3043/40 A/B | transparent transparent | 40[1] 40[1] | 10 N/mm²[2] 10 N/mm²[2] | 680 %[3] 680 %[3] | 36 N/mm[4] 36 N/mm[4] | 25 %[5] 25 %[5] |
| POWERSIL® 464 A/B | - - | 50[1] 50[1] | 7.0 N/mm²[2] 7.0 N/mm²[2] | 350 %[3] 350 %[3] | 25 N/mm[4] 25 N/mm[4] | - - |
| POWERSIL® 466 A/B | - - | 38[1] 38[1] | 7.0 N/mm²[2] 7.0 N/mm²[2] | 650 %[3] 650 %[3] | 28 N/mm[4] 28 N/mm[4] | 11 %[5] 11 %[5] |
| POWERSIL® 466 LV A/B | - - | 32[1] 32[1] | 7.0 N/mm²[2] 7.0 N/mm²[2] | 650 %[3] 650 %[3] | 20 N/mm[4] 20 N/mm[4] | 11 %[5] 11 %[5] |
| POWERSIL® 730 A/B | - - | 35[1] 35[1] | 8.0 N/mm²[2] 8.0 N/mm²[2] | 600 %[3] 600 %[3] | 26 N/mm[4] 26 N/mm[4] | - - |
| POWERSIL® 732 CS A/B | - - | 33[1] 33[1] | 9.0 N/mm²[2] 9.0 N/mm²[2] | 750 %[3] 750 %[3] | 35 N/mm[4] 35 N/mm[4] | - - |
| POWERSIL® 735 LIGHTGRAY A/B | - - | 39[1] 39[1] | 8.0 N/mm²[2] 8.0 N/mm²[2] | 500 %[3] 500 %[3] | 30 N/mm[4] 30 N/mm[4] | - - |
| POWERSIL® 740 DARK GRAY A/B | - - | 40[1] 40[1] | 9.8 N/mm²[2] 9.8 N/mm²[2] | 650 %[3] 650 %[3] | 35 N/mm[4] 35 N/mm[4] | - - |
| POWERSIL® 740 LIGHTGRAY A/B | - - | 40[1] 40[1] | 9.8 N/mm²[2] 9.8 N/mm²[2] | 650 %[3] 650 %[3] | 35 N/mm[4] 35 N/mm[4] | - - |
| POWERSIL® XLR® 630 A/B | - - | 35[1] 35[1] | 7.0 N/mm²[2] 7.0 N/mm²[2] | 450 %[3] 450 %[3] | 25 N/mm[4] 25 N/mm[4] | - - |
[1] Hardness Shore A | DIN ISO 48-4, [2] Tensile strength | ISO 37 type 1, [3] Elongation at break | ISO 37 type 1, [4] Tear strength | ASTM D 624 B, [5] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C, [6] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A