ELASTOSIL® NT 76

ELASTOSIL® NT 76 is a solvent-free, addition curing silicone rubber with non-thixotropic viscosity.



Properties

  •  general purpose grade for textile coatings 
  •  especially suitable for fine coatings < 100 g/m²
  •  non-thixotropic rheological behavior
  •  easy processing 

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

ELASTOSIL® NT 76 is a general purpose silicone rubber for textile coating applications, like manufacturing of conveyor belts, electrical sleevings, protective clothing, bellow expansion joints, awnings, sunblinds, sports performance fabrics, airbags and medical fabrics.

Due to the low viscosity and the non-thixotropic rheology ELASTOSIL® NT 76 is especially suited for fine coatings. It can also be used to dilute other liquid silicone rubbers to adjust coating viscosity. 

ELASTOSIL® NT 76 is processed by thorough incorporation of a crosslinker.

 

Recommended ratio is 100 parts of ELASTOSIL® NT 76 plus 

 

- 3 parts of CROSSLINKER 525

 

Pot life at 23°C: 2-3 days

 

Recommended curing conditions: 3 min at 150°C or 1 min at 180°C

 

Adhesion of ELASTOSIL® NT 76 depends on substrate and can be varied by crosslinker type/amount and additives (e.g. CATALYST C05 or adhesion promoters). Preliminary testing should be carried out to determine optimum formulation and cure conditions.

Packaging

This product is available in 20 kg pails and 200 kg drums. 

Storage

Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds.

 

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Appearance Hardness Shore A Tensile strength Elongation at break Tear strength Compression Set
ELASTOSIL® LR 3003/20 TR A/B transparent transparent 22[1] 22[1] 8.3 N/mm²[2] 8.3 N/mm²[2] 870 %[3] 870 %[3] 24 N/mm[4] 24 N/mm[4] 17 %[5] 17 %[5]
ELASTOSIL® LR 3003/30 A/B transparent transparent 31[1] 31[1] 7.5 N/mm²[2] 7.5 N/mm²[2] 620 %[3] 620 %[3] 23 N/mm[4] 23 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® LR 3153 A/B colorless colorless 60[1] 60[1] 7.5 N/mm²[2] 7.5 N/mm²[2] 170 %[3] 170 %[3] 14 N/mm[4] 14 N/mm[4] - -
ELASTOSIL® LR 6240 A/B transparent transparent 30[1] 30[1] 1.7 N/mm²[2] 1.7 N/mm²[2] 290 %[3] 290 %[3] 4.9 N/mm[4] 4.9 N/mm[4] - -
ELASTOSIL® LR 6250 F TRANSPARENT transparent transparent 36[1] 36[1] 5.0 N/mm²[2] 5.0 N/mm²[2] 350 %[3] 350 %[3] 10 N/mm[4] 10 N/mm[4] - -
ELASTOSIL® LR 6260 A/B ivory ivory 39[1] 39[1] 5.1 N/mm²[2] 5.1 N/mm²[2] 380 %[3] 380 %[3] 8.9 N/mm[4] 8.9 N/mm[4] - -
ELASTOSIL® LR 6320 F transparent transparent 20[1] 20[1] 2.4 N/mm²[2] 2.4 N/mm²[2] 450 %[3] 450 %[3] 4.3 N/mm[4] 4.3 N/mm[4] - -
ELASTOSIL® LR 6360 F transparent transparent 60[1] 60[1] 5.0 N/mm²[2] 5.0 N/mm²[2] 150 %[3] 150 %[3] 6.1 N/mm[4] 6.1 N/mm[4] - -
ELASTOSIL® NT 76 colorless colorless 20[1] 20[1] 0.7 N/mm²[2] 0.7 N/mm²[2] 160 %[3] 160 %[3] 2.3 N/mm[4] 2.3 N/mm[4] - -
Legend
[1] Hardness Shore A | DIN ISO 48-4,  [2] Tensile strength | ISO 37 type 1,  [3] Elongation at break | ISO 37 type 1,  [4] Tear strength | ASTM D 624 B,  [5] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C 

Order

My media


My favorites

My products