ELASTOSIL® LR 3025/40 A/B

ELASTOSIL® LR 3025/40 A/B liquid silicone rubber is a paste-like, readily pigmentable two-component compound with short curing time. Its vulcanizates are noted for their high resistance to fuel cell environment. Thanks to the excellent compression set, there is no need to post-cure technical parts.



Properties

ELASTOSIL® LR 3025/40 offers excellent  performance in fuel cell applications, especially outstanding low compression set even in contact with coolants.

Specific features of ELASTOSIL® LR 3025/40 A/B

  • Fast curing
  • Low compression set without post-cure

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

ELASTOSIL® LR 3025/40 A/B is particularly suitable for the economical production of large series of injection molded articles. Parts made from ELASTOSIL® LR 3025/40 A/B can generally be used for technical applications without postcuring, but do not comply with regulations concerning use in the pharmaceutical and food industry. Due to their optimized stability against fuel cell gases and high resistance to effects related to noble metal migration, ELASTOSIL® LR 3025/40 A/B is mainly used to manufacture gaskets for fuel cells.

The A and B components are delivered ready to use in 20 kg pail and 200 kg drum kits. With adequate metering equipment, they can be pumped directly from the original containers into the injection molding machine and mixed by a static mixer. The mixing ratio is 1 : 1. At room temperature, mixtures of A and B components have a pot life of at least three days. 

 

For detailed information refer to our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".

Packaging

This product is available in 20 kg pail and 200 kg drum kits.

Storage

Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Order

My media


My favorites

My products