ELASTOSIL® LR 3002/35 A/B

ELASTOSIL® LR 3002/35 A/B is a low viscous two-component compound with excellent processing properties.



Properties

- very easy to process due to its low viscosity


- excellent dielectrical properties


- good mechanical properties

Specific features of ELASTOSIL® LR 3002/35 A/B

  • Product Rheology: Low viscosity
  • Specific Features: Low viscosity
  • Specific Features: Reduced volatile content

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

The material fits very well all requirements for manufacturing of large articles with special dosing and metering equipment because of it`s low viscosity.

 


- insulators and cable accessories
- manufacturing of large articles
- injection molding or special dosing equipment

The A and B components are delivered ready to use in 20 kg pail and 200 kg drum kits. With adequate metering equipment, they can be pumped directly from the original containers into the injection molding machine and mixed by a static mixer. The mixing ratio is 1 : 1.

For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".

Packaging

This product is available in 20 kg pail and 200 kg drum kits.

Storage

Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Appearance Hardness Shore A Tensile strength Elongation at break Tear strength Compression Set
ELASTOSIL® LR 3002/35 A/B colourless colourless 33[1] 33[1] 7.0 N/mm²[2] 7.0 N/mm²[2] 460 %[3] 460 %[3] 25 N/mm[4] 25 N/mm[4] - -
ELASTOSIL® LR 3003/20 TR A/B transparent transparent 22[1] 22[1] 8.3 N/mm²[2] 8.3 N/mm²[2] 870 %[3] 870 %[3] 24 N/mm[4] 24 N/mm[4] 17 %[5] 17 %[5]
ELASTOSIL® LR 3003/30 A/B transparent transparent 31[1] 31[1] 7.5 N/mm²[2] 7.5 N/mm²[2] 620 %[3] 620 %[3] 23 N/mm[4] 23 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® LR 3003/40 A/B transparent transparent 40[1] 40[1] 10.0 N/mm²[2] 10.0 N/mm²[2] 610 %[3] 610 %[3] 30 N/mm[4] 30 N/mm[4] 11 %[5] 11 %[5]
ELASTOSIL® LR 3003/50 A/B transparent transparent 50[1] 50[1] 10.3 N/mm²[2] 10.3 N/mm²[2] 490 %[3] 490 %[3] 28 N/mm[4] 28 N/mm[4] 13 %[5] 13 %[5]
ELASTOSIL® LR 3003/60 A/B transparent transparent 60[1] 60[1] 9.5 N/mm²[2] 9.5 N/mm²[2] 340 %[3] 340 %[3] 27 N/mm[4] 27 N/mm[4] 12 %[5] 12 %[5]
ELASTOSIL® LR 3003/70 A/B transparent transparent 70[1] 70[1] 8.6 N/mm²[2] 8.6 N/mm²[2] 290 %[3] 290 %[3] 20 N/mm[4] 20 N/mm[4] 12 %[5] 12 %[5]
ELASTOSIL® LR 3004/40 A/B transparent transparent 40[1] 40[1] 10.0 N/mm²[2] 10.0 N/mm²[2] 610 %[3] 610 %[3] 35 N/mm[4] 35 N/mm[4] 10 %[5] 10 %[5]
ELASTOSIL® LR 3005/60 A/B transparent transparent 60[1] 60[1] 9.5 N/mm²[2] 9.5 N/mm²[2] 380 %[3] 380 %[3] 28 N/mm[4] 28 N/mm[4] 18 %[6] -
ELASTOSIL® LR 3043/40 A/B transparent transparent 40[1] 40[1] 10 N/mm²[2] 10 N/mm²[2] 680 %[3] 680 %[3] 36 N/mm[4] 36 N/mm[4] 25 %[5] 25 %[5]
POWERSIL® 464 A/B - - 50[1] 50[1] 7.0 N/mm²[2] 7.0 N/mm²[2] 350 %[3] 350 %[3] 25 N/mm[4] 25 N/mm[4] - -
POWERSIL® 466 A/B - - 38[1] 38[1] 7.0 N/mm²[2] 7.0 N/mm²[2] 650 %[3] 650 %[3] 28 N/mm[4] 28 N/mm[4] 11 %[5] 11 %[5]
POWERSIL® 466 LV A/B - - 32[1] 32[1] 7.0 N/mm²[2] 7.0 N/mm²[2] 650 %[3] 650 %[3] 20 N/mm[4] 20 N/mm[4] 11 %[5] 11 %[5]
POWERSIL® 730 A/B - - 35[1] 35[1] 8.0 N/mm²[2] 8.0 N/mm²[2] 600 %[3] 600 %[3] 26 N/mm[4] 26 N/mm[4] - -
POWERSIL® 732 CS A/B - - 33[1] 33[1] 9.0 N/mm²[2] 9.0 N/mm²[2] 750 %[3] 750 %[3] 35 N/mm[4] 35 N/mm[4] - -
POWERSIL® 735 LIGHTGRAY A/B - - 39[1] 39[1] 8.0 N/mm²[2] 8.0 N/mm²[2] 500 %[3] 500 %[3] 30 N/mm[4] 30 N/mm[4] - -
POWERSIL® 740 DARK GRAY A/B - - 40[1] 40[1] 9.8 N/mm²[2] 9.8 N/mm²[2] 650 %[3] 650 %[3] 35 N/mm[4] 35 N/mm[4] - -
POWERSIL® 740 LIGHTGRAY A/B - - 40[1] 40[1] 9.8 N/mm²[2] 9.8 N/mm²[2] 650 %[3] 650 %[3] 35 N/mm[4] 35 N/mm[4] - -
POWERSIL® XLR® 630 A/B - - 35[1] 35[1] 7.0 N/mm²[2] 7.0 N/mm²[2] 450 %[3] 450 %[3] 25 N/mm[4] 25 N/mm[4] - -
Legend
[1] Hardness Shore A | DIN ISO 48-4,  [2] Tensile strength | ISO 37 type 1,  [3] Elongation at break | ISO 37 type 1,  [4] Tear strength | ASTM D 624 B,  [5] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C,  [6] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A 

Order

My media


My favorites

My products