ELASTOSIL® 47007

Solvent free, addition curing silicone top coat 



Properties

  •  dull, non blocking surface
  •  soft hand
  •  low coefficient of friction
  •  dirt repellent
  •  good adhesion to silicone rubber
  •  can be bonded with silicone glues
  •  easy processing

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

ELASTOSIL® 47007 can be used as a top coat on silicone rubber coated air bag fabrics to achieve a dull, non-blocking surface with low coefficient of friction. Furthermore, this protective layer improves the dirt repellency of silicone rubber coatings for protective clothing and architectural membranes (especially for indoor applications).
 

After thorough homogenization, ELASTOSIL® 47007 is processed by incorporation of a crosslinker and applied via blade coating or gravure printing.  

 

Recommended ratio is 100 parts of ELASTOSIL® 47007 plus

 

- 10 parts of CROSSLINKER 525 or

- 5 parts of CROSSLINKER HX or

- 3 parts of CROSSLINKER W

 

Recommend curing conditions: 2 min at 180°C

Packaging

This product is available in 1 kg cans, 30 kg pails and 250 kg drum kits.

Storage

Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds.

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

During storage fillers can settle and the viscosity of this product will drop. It is advisable to homogenize the product thoroughly before use.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Order

My media


My favorites

My products