ELASTOSIL® R 757/60

Vulcanizates of ELASTOSIL® R 757/60 possess excellent resistance to hot air, particularly after addition of heat stabilizer. The material shows good tear resistance, low compression set, and high elasticity. Appliance cables in accordance with UL 758, 250 ºC rating.



Properties

  • good mechanical properties
  • good rheological properties
  • outstanding heat stability

Specific features of ELASTOSIL® R 757/60

  • Good heat stability

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.


Appliance cables in accordance with UL 758, 250 °C Rating

Vulcanizates that have not been post-cured can be used in numerous applications as post-curing has only little effect on mechanical properties.  To obtain optimum compression set values it is advisable to post cure for 4 h at 200 °C.

Storage

The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Appearance Color Density Dielectric constant Dielectric strength Dissipation factor Elongation at break Hardness Shore A Specific gravity Tensile strength Volume resistivity
ELASTOSIL® R 502/75 OH - - white white 1.28 g/cm³[1] 10.682 lb/gal[1] 3.2[10] 3.2[10] 23 kV/mm[13] 23 kV/mm[13] 14 x 10⁻ ³ tan δ[12] 14 x 10⁻ ³ tan δ[12] 400 %[6] 400 %[6] 73[2] 73[2] - - 8.7 N/mm²[4] 8.7 N/mm²[4] 10¹⁵ Ohmcm[8] 10¹⁵ Ohmcm[8]
ELASTOSIL® R 512/70 OH beige beige - - 1.37 g/cm³[1] 11.433 lb/gal[1] 3.0[11] - 21 kV/mm[14] - - - 300 %[6] 300 %[6] 70[2] 70[2] - - 6.5 N/mm²[4] 6.5 N/mm²[4] 10¹⁴ Ohmcm[9] -
ELASTOSIL® R 757/60 Translucent[15] - - - - - - - - - - - 400 %[7] - 62[3] - 1.16 g/cm³ 9.681 lb/gal 8.5 mPa[5] - - -
Legend
[1] Density | DIN EN ISO 1183-1 A,  [2] Hardness Shore A | ISO 7619-1,  [3] Hardness Shore A | DIN 53505 | ± 5,  [4] Tensile strength | ISO 37 type 1,  [5] Tensile strength | DIN 53404 S1,  [6] Elongation at break | ISO 37 type 1,  [7] Elongation at break | DIN 53404 S1,  [8] Volume resistivity | DIN IEC 93,  [9] Volume resistivity | IEC 62631-3-1,  [10] Dielectric constant | 50 Hz | IEC 62631-2-1,  [11] Relative Permittivity | 50 Hz | IEC 62631-2-1,  [12] Dissipation factor | 50 Hz | IEC 62631-2-1,  [13] Dielectric strength | IEC 60243-1,  [14] Electric strength | IEC 60243-1,  [15] Appearance | DIN ISO 2137 

Order

My media


My favorites

My products