ELASTOSIL® R 502/75 OH
ELASTOSIL® R 502/75 OH is a peroxide crosslinking HCR silicone for the manufacture of silicone-insulated safety cables that maintain circuit integrity in case of fire.
In case of fire ELASTOSIL® R 502/75 OH forms a ceramic-like layer with high insulation resistance, good mechanical stability and low smoke formation.
The color of the rubber base is white. Colors will not match the RAL color codes of the masterbatches used in paste or pellet form in the compound (pastel colors).
This product can be used within a temperature range of - 55 °C to + 210 °C.
Specific features of ELASTOSIL® R 502/75 OH
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
For flame resistant cable construction (safety cables). Cables containing ELASTOSIL® R 502/75 OH have successfully passed standards, like NFC 32070 CR1, BS 6387 CWZ, DIN 4102, part 12 (E30,-60,-90), UL 2196, EN 50200, IEC 60331-11, etc.
The raw rubber requires the addition of peroxides for vulcanization at elevated temperatures. A homogeneous incorporation is a must, but please avoid temperatures >30°C along the incorporation process in order to maintain best processing behavior. Pot life is depending on the used peroxide and storage condition.
For detailed information refer to our latest brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".
This product is available in 20 kg and 540 kg cardboard packaging.
Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.
Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Would you like a product sample?
You can request a product sample here.Request sample
|Appearance||Elongation at break||Hardness Shore A||Specific gravity||Tensile strength|
|ELASTOSIL® R 757/60||Translucent Translucent||400 % 400 %||62 62||1.16 g/cm³ 9.681 lb/gal||8.5 mPa 8.5 mPa|
 Hardness Shore A | DIN 53505 | ± 5,  Tensile strength | DIN 53404 S1,  Elongation at break | DIN 53404 S1,  Appearance | DIN ISO 2137