Our system has detected that you are from United States, which is why this country has been selected. Do you still wish to change your country?

This product is not available in United States. Please use the product search or contact us.

ELASTOSIL® R 101/65 OH

Peroxide cured vulcanizates made from this compound exhibit a unique combination of characteristics. Vulcanizates made of ELASTOSIL® R 101/65 OH exhibit a very high rebound resilience and elasticity. The compounds are easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.



Properties

This product can be used within a temperature range of - 55 °C to + 210 °C. The addition of heat stabilizers at service temperatures of more than 180 °C is recommended. Further information to improve the heat stability by use of specific ELASTOSIL® AUX Heat Stabilizers can be obtained from the Technical Information Sheet "ELASTOSIL® AUX Stabilizers H" or from the latest brochures.

Special features of ELASTOSIL® R 101/65 OH

  • Food-contact
  • Good mechanics
  • High rebound resilience
  • Very good elastic recovery and high elasticity

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

Some special applications, such as membranes or engine mounts, require silicone rubbers with a particularly high elasticity and durability.

 

Postcured parts can be used for food contact applications and are suitable for use under the Recommendation "XV.
Silicones" of the BfR and FDA § 177.2600 under observance of any given limitations on extractable and volatile
substances.

Compression or injection molding with Curing agents C1 or C6 is the preferred processing method.

The raw rubber requires the addition of peroxides for vulcanization at elevated temperatures. A homogeneous  incorporation is a must, but please avoid temperatures >30°C along the incorporation process in order to maintain best processing behavior. Pot life is depending on the used peroxide and storage condition.                  

For detailed information refer to our latest brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".

Packaging

This product is available in 20 kg and 540 kg cardboard packaging.

Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.

Storage

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian 49221-9397
United States
+1  888  922-5374 (Phone)
+1 517 264-8246  (Fax)
Contact sales
Website

How can we help you?

    Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample