SEMICOSIL® 988 TIC

SEMICOSIL® 988 TIC is a non-slump, thermally curable, addition-curing, one-part silicone rubber with excellent insulation properties. This product is optimized for insulation coating applications for disk power semiconductors.



Properties

• Ready-to-use, one-part system
• Thixotropic
• Transparent
• Medium hardness
• High flexibility (low-stress adhesive)
• Rapid heat cure
• Excellent primerless adhesion on many substrates
• Excellent insulation properties
• Low ion content

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

• General-purpose adhesive for the electronics industry
• FIPG and CIPG applications
• Power semiconductor insulation coating

All surfaces must be clean and free of contaminants that will inhibit the cure of SEMICOSIL® 988 TIC.
Examples of inhibiting contaminants are sulfur containing materials, plasticizers, urethanes, amine containing materials and organometallic compounds – especially organotin compounds.
If a substrate’s ability to inhibit cure is unknown, a small scale test should be run to determine compatibility.

Because of the high thixotropy (shear thinning effect) SEMICOSIL® 988 TIC can be dispensed easily with all dispensing equipments.

SEMICOSIL® 988 TIC works best when cured at 125 °C or more depending on the size and heat sink properties of the components.

SEMICOSIL® 988 TIC shows good primerless adhesion to many substrates. We recommend running preliminary tests to optimize conditions for the particular application.

Storage

SEMICOSIL® 988 TIC should be stored between 5 °C and 25 °C in the tightly closed original container. The 'Best use before end' date of each batch is displayed on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality as-surance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Order

My media


My favorites

My products