WACKER® AS 100
WACKER® AS 100 Silicone fluid is a clear, colorless, and odorless polydimethylsiloxane with a low proportion of phenyl groups.
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
- damping fluid
- heat transfer fluid
- base fluid of low temperature lubricants
For practical purposes, the useful temperature range of WACKER® AS 100 is between -70 °C and +200 °C. However, this presupposes that heat-stressing of the fluid occurs under "chemically pure" conditions.
Even trace amounts of acids, alkalis, mineral oils, organometallic compounds, metal salts or metal oxides can seriously reduce the service life.
The flash point of the silicone fluid may be changed by heat-stressing. It is therefore particularly important in open systems to check the flash point at least once a year and more often if operating conditions demand.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Would you like a product sample?
You can request a product sample here.Request sample
|Appearance||Refractive index||Viscosity, kinematic|
|WACKER® AP 1000||clear, colorless clear, colorless||1.5000 - 1.5150 1.5000 - 1.5150||900 - 1100 mm²/s 900 - 1100 mm²/s|
|WACKER® AP 200||clear, colorless clear, colorless||approx. 1.5 -||- -|
|WACKER® AP 500||clear, colorless clear, colorless||approx. 1.51 -||- -|
|WACKER® AR 200||clear, colorless clear, colorless||approx. 1.45 approx. 1.45||- -|
|WACKER® AS 100||clear, colorless clear, colorless||1.42 1.42||- -|
 Viscosity, kinematic | 25 °C | DIN 51562-1 ,  Refractive index | 25 °C | DIN 51423,  Refractive index | DIN 51423,  Refractive index | 25.0 °C | DIN 51423