This product is not available in United States. Please use the product search or contact us.

ELASTOSIL® R plus 4806/20 MH

HTV silicone rubbers of the grade ELASTOSIL® R plus 4806/20 MH are oil-bleeding one-component platinum-curing compounds for the manufacture of molded articles. The vulcanizates form a thin oil film with lubricationg properties shortly after the curing process. As the crosslinking system is based on platinum cure no peroxide decomposition products can be formed during curing.



Properties

ELASTOSIL® R plus 4806/20 MH is a fast curing silicone rubber exhibiting excellent cut resistance. Thanks to addition cure, the vulcanization reaction is significantly faster compared to peroxide curing materials. No peroxide decomposition products are formed during vulcanization.

 

The addition of heat stabilizers at service temperatures of more than 180 °C is recommended.

 

Further information about an improvement of the heat stability by use of specific ELASTOSIL® AUX Heat Stabilizers can be obtained from the Technical Information Sheet "ELASTOSIL® AUX Stabilizers H" or the latest edition of our brochures.

Specific features of ELASTOSIL® R plus 4806/20 MH

  • Crosslinking Property: Addition Curing
  • Crosslinking Property: One-component
  • Specific Features: Addition Curing
  • Specific Features: Oil bleeding
  • Specific Features: One-component

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

ELASTOSIL® R plus 4806/20 MH is suitable for the manufacture of molded articles like multi cavity seals for technical applications. Specially thick walled articles can take advantage of this fast curing material.

This material can be processed on conventional silicone rubber injection molding equipment. Caution, danger of de- activation! The platinum catalyst can be de-activated already by amines or sulphur components in the air.

 

For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".

Packaging

This product is available in 20 kg cardboard packaging.

Storage

Once opened, cardboard boxes should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

There are no comparable products

Order

My media


My favorites

My products