ELASTOSIL® R 755/40 OH

ELASTOSIL® R 755/40 OH is a low-viscosity peroxide curing silicone rubber for manufacturing silicone rubber based spin casting discs.



Properties

  •  extremely high network density
  •  excellent resistance against liquid alloys in spincasting applications
  •  accepts high amounts of inactive filler

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

The requirements of the spin casting disc largely depend on different model shapes. Casting models with deep undercuts may require blends of ELASTOSIL® R 755/40, softer or higher tear grades alternative with ELASTOSIL® EL AUX HND Batch. Thus it is necessary to prepare the best suitable disc quality for each application. ELASTOSIL® R 755/40 has been developed specifically for a high load of fillers for preparing compounds for spin-casting discs.

Further information you can get in our technical leaflet "Manufacturing Silicone Rubber based Spin Casting Discs". 

ELASTOSIL® R 755/40 OH is a silicone rubber base for spin casting discs. Usually ELASTOSIL® R 755/40 OH is mixed with 80 – 100 parts ground quartz and 1.5 parts ELASTOSIL® AUX crosslinker C1 (Dicumylperoxide).

 

Ageing properties (non-post-cured)

100.0 parts           R 755/40

80.0 parts             Quartz

____________________________________________

Hardness ± 5    Initial value             65

                          30 min, 350 °C       53

                          60 min, 350 °C       51

                         180 min, 350 °C      62

These figures are intended as a guide and should not be used in preparing specifications.

 

 

For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".

Packaging

This product is available in 20 kg and 540 kg cardboard packaging.

Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.

Storage

Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination.
 

The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Please choose an application for viewing your product matches.

Order

My media


My favorites

My products