ELASTOSIL® R 570/60 OH

ELASTOSIL® R 570/60 OH is a peroxide curing HCR silicone rubber for the manufacture of electrically conductive products.



Properties

This product is electrically conductive and shows a low volume resistivity.

 

ELASTOSIL® R 570/60 OH is not suitable for vulcanisation using crosslinker E.

 

This product can be used within a temperature range of - 55 °C to + 210 °C.

Specific features of ELASTOSIL® R 570/60 OH

  • Electrically conductive

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

Control elements for cable accessories, contacts and keypads, interconnectors, electrically conductive rollers, electrodes.

The raw rubber requires the addition of peroxides for vulcanization at elevated temperatures. A homogeneous  incorporation is a must, but please avoid temperatures >30°C along the incorporation process in order to maintain best processing behavior. Pot life is depending on the used peroxide and storage condition.

 

IMPORTANT: in order to produce a ready-to-use-compound, an increased concentration of peroxide is needed. ELASTOSIL® R 570/60 OH can be crosslinked with 2.5 % crosslinker C1 or crosslinker C6. Crosslinker E is not suitable!

 

Processing by press moulding or extrusion and curing by cure vapor (CV). Post curing for 4h at 200°C is necessary.    



For detailed information refer to our latest brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".

Packaging

This product is available in 20 kg and 540 kg cardboard packaging.

Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.

Storage

Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Appearance Compression Set Density Elongation at break Hardness Shore A Tensile strength Volume resistivity
ELASTOSIL® R 101/25 OH translucent translucent 13 %[9] 13 %[9] 1.07 g/cm³[1] 8.93 lb/gal[1] 900 %[7] 900 %[7] 23[3] 23[3] 6.0 N/mm²[5] 6.0 N/mm²[5] - -
ELASTOSIL® R 101/35 OH translucent translucent 10 %[9] 10 %[9] 1.09 g/cm³[1] 9.096 lb/gal[1] 700 %[7] 700 %[7] 35[3] 35[3] 8.0 N/mm²[5] 8.0 N/mm²[5] - -
ELASTOSIL® R 101/45 OH translucent translucent 10 %[9] 10 %[9] 1.10 g/cm³[1] 9.18 lb/gal[1] 540 %[7] 540 %[7] 47[3] 47[3] 8.0 N/mm²[5] 8.0 N/mm²[5] - -
ELASTOSIL® R 101/65 OH translucent translucent 10 %[9] 10 %[9] 1.13 g/cm³[1] 9.43 lb/gal[1] 200 %[7] 200 %[7] 65[3] 65[3] 8.0 N/mm²[5] 8.0 N/mm²[5] - -
ELASTOSIL® R 401/10 OH transparent transparent 41 %[9] 41 %[9] 1.07 g/cm³[1] 8.93 lb/gal[1] 1200 %[7] 1200 %[7] 13[3] 13[3] 6.00 N/mm²[5] 6.00 N/mm²[5] - -
ELASTOSIL® R 401/20 OH transparent transparent 33 %[9] 33 %[9] 1.11 g/cm³[1] 9.263 lb/gal[1] 1000 %[7] 1000 %[7] 23[3] 23[3] 9.0 N/mm²[5] 9.0 N/mm²[5] - -
ELASTOSIL® R 401/30 OH transparent transparent 20 %[9] 20 %[9] 1.11 g/cm³[1] 9.263 lb/gal[1] 720 %[7] 720 %[7] 34[3] 34[3] 10.0 N/mm²[5] 10.0 N/mm²[5] - -
ELASTOSIL® R 401/30 S transparent transparent 15 %[9] 15 %[9] 1.09 g/cm³[1] 9.096 lb/gal[1] 800 %[7] 800 %[7] 33[3] 33[3] 10 N/mm²[5] 10 N/mm²[5] - -
ELASTOSIL® R 401/40 S transparent transparent 16 %[9] 16 %[9] 1.12 g/cm³[1] 9.347 lb/gal[1] 730 %[7] 730 %[7] 41[3] 41[3] 11.0 N/mm²[5] 11.0 N/mm²[5] - -
ELASTOSIL® R 401/50 S transparent transparent 17 %[9] 17 %[9] 1.15 g/cm³[1] 9.597 lb/gal[1] 640 %[7] 640 %[7] 52[3] 52[3] 12.0 N/mm²[5] 12.0 N/mm²[5] - -
ELASTOSIL® R 401/55 S transparent transparent 35 %[9] 35 %[9] 1.14 g/cm³[1] 9.514 lb/gal[1] 470 %[7] 470 %[7] 55[4] - 11.0 N/mm²[5] 11.0 N/mm²[5] - -
ELASTOSIL® R 401/60 S transparent transparent 16 %[9] 16 %[9] 1.15 g/cm³[1] 9.597 lb/gal[1] 530 %[7] 530 %[7] 62[3] 62[3] 11.0 N/mm²[5] 11.0 N/mm²[5] - -
ELASTOSIL® R 401/70 S transparent transparent 22 %[9] 22 %[9] 1.18 g/cm³[1] 9.848 lb/gal[1] 530 %[7] 530 %[7] 71[3] 71[3] 11.0 N/mm²[5] 11.0 N/mm²[5] - -
ELASTOSIL® R 401/80 S transparent transparent 41 %[9] 41 %[9] 1.20 g/cm³[1] 10.014 lb/gal[1] 430 %[7] 430 %[7] 81[3] 81[3] 10.0 N/mm²[5] 10.0 N/mm²[5] - -
ELASTOSIL® R 401/90 OH transparent transparent 19 %[9] 19 %[9] 1.22 g/cm³[1] 10.181 lb/gal[1] 160 %[7] 160 %[7] 89[3] 89[3] 7.4 N/mm²[5] 7.4 N/mm²[5] - -
ELASTOSIL® R 420/30 OH transparent transparent 18 %[9] 18 %[9] 1.10 g/cm³[1] 9.18 lb/gal[1] 930 %[7] 930 %[7] 29[3] 29[3] 10.0 N/mm²[5] 10.0 N/mm²[5] - -
ELASTOSIL® R 420/40 S transparent transparent 24 %[9] 24 %[9] 1.12 g/cm³[1] 9.347 lb/gal[1] 800 %[7] 800 %[7] 43[3] 43[3] 10.0 N/mm²[5] 10.0 N/mm²[5] - -
ELASTOSIL® R 420/50 S transparent transparent 23 %[9] 23 %[9] 1.15 g/cm³[1] 9.597 lb/gal[1] 730 %[7] 730 %[7] 53[3] 53[3] 11.0 N/mm²[5] 11.0 N/mm²[5] - -
ELASTOSIL® R 420/60 S transparent transparent 25 %[9] 25 %[9] 1.17 g/cm³[1] 9.764 lb/gal[1] 660 %[7] 660 %[7] 62[3] 62[3] 11.0 N/mm²[5] 11.0 N/mm²[5] - -
ELASTOSIL® R 420/70 S transparent transparent 38 %[9] 38 %[9] 1.19 g/cm³[1] 9.931 lb/gal[1] 570 %[7] 570 %[7] 72[3] 72[3] 10.0 N/mm²[5] 10.0 N/mm²[5] - -
ELASTOSIL® R 490/55 OH transparent transparent 28 %[9] 28 %[9] 1.17 g/cm³[1] 9.764 lb/gal[1] 520 %[7] 520 %[7] 53[3] 53[3] 11.0 N/mm²[5] 11.0 N/mm²[5] - -
ELASTOSIL® R 570/50 OH black black 37 %[9] 37 %[9] 1.11 g/cm³[1] 9.263 lb/gal[1] 370 %[7] 370 %[7] 52[3] 52[3] 7.9 N/mm²[5] 7.9 N/mm²[5] 8 Ohmcm[13] 8 Ohmcm[13]
ELASTOSIL® R 570/60 OH black black 29 %[9] 29 %[9] 1.13 g/cm³[1] 9.43 lb/gal[1] 230 %[7] 230 %[7] 62[3] 62[3] 7.4 N/mm²[5] 7.4 N/mm²[5] 3,4 Ohmcm[13] 3,4 Ohmcm[13]
ELASTOSIL® R 570/70 OH black black 29 %[9] 29 %[9] 1.16 g/cm³[1] 9.681 lb/gal[1] 180 %[7] 180 %[7] 71[3] 71[3] 7.4 N/mm²[5] 7.4 N/mm²[5] 4.0 Ohmcm[13] 4.0 Ohmcm[13]
ELASTOSIL® R 573/50 A/B black black 30 %[10] - 1.11 g/cm³[1] 9.263 lb/gal[1] 340 %[7] 340 %[7] 50[3] 50[3] 5.5 N/mm²[5] 5.5 N/mm²[5] 7 Ohmcm[14] -
ELASTOSIL® R 573/70 A/B black black 29 %[10] - 1.16 g/cm³[1] 9.681 lb/gal[1] 246 %[7] 246 %[7] 71[3] 71[3] 6.2 N/mm²[5] 6.2 N/mm²[5] 1.6 Ohmcm[14] -
ELASTOSIL® R 700/40 OH translucent[12] - 10 %[11] - 1.09 g/cm³[2] - 470 %[7] 470 %[7] 42[3] 42[3] 7.3 N/mm²[5] 7.3 N/mm²[5] - -
ELASTOSIL® R 700/80 OH beige[12] - 17 %[11] - 1.39 g/cm³[2] - 190 %[7] 190 %[7] 83[3] 83[3] 6.2 N/mm²[5] 6.2 N/mm²[5] - -
ELASTOSIL® R 701/40 S opaque opaque 7 %[11] - 1.10 g/cm³[2] - 460 %[7] 460 %[7] 40[3] 40[3] 6.9 N/mm²[5] 6.9 N/mm²[5] - -
ELASTOSIL® R 701/50 OH beige beige 7 %[11] - 1.15 g/cm³[2] - 470 %[7] 470 %[7] 51[3] 51[3] 7.8 N/mm²[5] 7.8 N/mm²[5] - -
ELASTOSIL® R 701/60 OH beige beige 6 %[11] - 1.24 g/cm³[2] - 340 %[7] 340 %[7] 61[3] 61[3] 7.6 N/mm²[5] 7.6 N/mm²[5] - -
ELASTOSIL® R 701/70 OH beige beige 7 %[11] - 1.30 g/cm³[2] - 280 %[7] 280 %[7] 71[3] 71[3] 7.8 N/mm²[5] 7.8 N/mm²[5] - -
ELASTOSIL® R 701/80 S beige beige 17 %[11] - 1.39 g/cm³[2] - 200 %[7] 200 %[7] 80[3] 80[3] 7.6 N/mm²[5] 7.6 N/mm²[5] - -
ELASTOSIL® R 750/40 OH translucent translucent 26 %[9] 26 %[9] 1.12 g/cm³[1] 9.347 lb/gal[1] 630 %[7] 630 %[7] 38[3] 38[3] 10.5 N/mm²[5] 10.5 N/mm²[5] - -
ELASTOSIL® R 750/50 OH translucent translucent 20 %[9] 20 %[9] 1.14[1] 9.514[1] 530 %[7] 530 %[7] 48[3] 48[3] 10.5 N/mm²[5] 10.5 N/mm²[5] - -
ELASTOSIL® R 750/60 OH translucent translucent 14 %[9] 14 %[9] 1.18 g/cm³[1] 9.848 lb/gal[1] 460 %[7] 460 %[7] 56[3] 56[3] 8.1 N/mm²[5] 8.1 N/mm²[5] - -
ELASTOSIL® R 752/50 OH translucent translucent 38 %[9] 38 %[9] 1.18 g/cm³[1] 9.848 lb/gal[1] 770 %[7] 770 %[7] 50[3] 50[3] 9.9 N/mm²[5] 9.9 N/mm²[5] - -
ELASTOSIL® R 752/70 OH translucent translucent 19 %[9] 19 %[9] 1.22 g/cm³[1] 10.181 lb/gal[1] 460 %[7] 460 %[7] 70[3] 70[3] 8.5 N/mm²[5] 8.5 N/mm²[5] - -
ELASTOSIL® R 755/40 OH white white - - 1.11 g/cm³[2] - 340 %[7] 340 %[7] 44[3] 44[3] 4.2 N/mm²[5] 4.2 N/mm²[5] - -
ELASTOSIL® R 755/60 OH opaque opaque 16 %[9] 16 %[9] 1.18 g/cm³[1] 9.848 lb/gal[1] 300 %[7] 300 %[7] 61[3] 61[3] 7.8 N/mm²[5] 7.8 N/mm²[5] - -
ELASTOSIL® R 756/40 OH transparent transparent 9 %[9] 9 %[9] 1.11 g/cm³[1] 9.263 lb/gal[1] 610 %[7] 610 %[7] 41[3] 41[3] 8.8 N/mm²[5] 8.8 N/mm²[5] - -
ELASTOSIL® R 756/50 OH transparent transparent 9 %[9] 9 %[9] 1.11 g/cm³[1] 9.263 lb/gal[1] 540 %[7] 540 %[7] 47[3] 47[3] 9.5 N/mm²[5] 9.5 N/mm²[5] - -
ELASTOSIL® R 756/60 OH transparent transparent 9 %[9] 9 %[9] 1.15 g/cm³[1] 9.597 lb/gal[1] 440 %[7] 440 %[7] 59[3] 59[3] 10.0 N/mm²[5] 10.0 N/mm²[5] - -
ELASTOSIL® R 756/70 OH transparent transparent 10 %[9] 10 %[9] 1.18 g/cm³[1] 9.848 lb/gal[1] 380 %[7] 380 %[7] 70[3] 70[3] 10.0 N/mm²[5] 10.0 N/mm²[5] - -
ELASTOSIL® R 771/60 OH - - - - 1.44 g/cm³[1] 12.017 lb/gal[1] 410 %[7] 410 %[7] 60[3] 60[3] 3.4 N/mm²[5] 3.4 N/mm²[5] - -
ELASTOSIL® R 771/70 OH - - - - 1.48 g/cm³[1] 12.351 lb/gal[1] 270 %[7] 270 %[7] 70[3] 70[3] 4.0 N/mm²[5] 4.0 N/mm²[5] - -
ELASTOSIL® R 861/60 S translucent translucent 6 %[9] 6 %[9] approx. 1.16 g/cm³[1] approx. 9.681 lb/gal[1] 390 %[7] 390 %[7] 60[3] 60[3] 8.4 N/mm²[5] 8.4 N/mm²[5] - -
ELASTOSIL® R 861/70 S translucent translucent 8 %[9] 8 %[9] 1.16 g/cm³[1] 9.681 lb/gal[1] 290 %[7] 290 %[7] 73[3] 73[3] 8.6 N/mm²[5] 8.6 N/mm²[5] - -
ELASTOSIL® R plus 4000/40 MH transparent transparent 35 %[9] 35 %[9] 1.12 g/cm³[1] 9.347 lb/gal[1] 860 %[7] 860 %[7] 40[3] 40[3] 9.3 N/mm²[5] 9.3 N/mm²[5] - -
ELASTOSIL® R plus 4000/50 transparent transparent 43 %[9] 43 %[9] 1.13 g/cm³[1] 9.43 lb/gal[1] 850 %[7] 850 %[7] 50[3] 50[3] 9.1 N/mm²[5] 9.1 N/mm²[5] - -
ELASTOSIL® R plus 4000/60 transparent transparent 23 %[9] 23 %[9] 1.16 g/cm³[1] 9.681 lb/gal[1] 680 %[7] 680 %[7] 60[3] 60[3] 9.9 N/mm²[5] 9.9 N/mm²[5] - -
ELASTOSIL® R plus 4000/70 transparent transparent 19 %[9] 19 %[9] 1.16 g/cm³[1] 9.681 lb/gal[1] 590 %[7] 590 %[7] 70[3] 70[3] 9.3 N/mm²[5] 9.3 N/mm²[5] - -
Legend
[1] Density | DIN EN ISO 1183-1 A,  [2] Density | 23 °C | DIN EN ISO 1183-1 A,  [3] Hardness Shore A | ISO 7619-1,  [4] Hardness Shore A | DIN ISO 7619-1,  [5] Tensile strength | ISO 37 type 1,  [6] Tensile strength | ISO 37 type 1,  [7] Elongation at break | ISO 37 type 1,  [8] Elongation at break | ISO 37 type 1,  [9] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 4 h / 200 °C,  [10] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 0.5 h / 200 °C,  [11] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A,  [12] Appearance and color,  [13] Volume resistivity | 23 °C | DIN IEC 93,  [14] Volume resistivity | IEC 62631-3-1 

Order

My media


My favorites

My products