ELASTOSIL® R 512/70 OH
ELASTOSIL® R 512/70 OH is a peroxide curing HCR silicone for the manufacture of silicone-insulated safety cables that maintain circuit integrity in case of fire.
In case of fire ELASTOSIL® R 512/70 OH forms a ceramic-like layer with high insulation resistance, good mechanical stability and low smoke formation.
The color of the rubber base is beige. Colors will not match the RAL color codes of the masterbatches used in paste or pellet form in the compound (pastel colors).
ELASTOSIL® R 512/70 OH is also available as 2-component-system (ELASTOSIL® R 512/70-1 & -2). The advantage is that the properties of the compound can be adjusted easily by modifying the mixing ratio of component -1 & -2 for the particular application.
This product can be used within a temperature range of - 55 °C to + 210 °C.
Specific features of ELASTOSIL® R 512/70 OH
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
For flame resistant cable constructions (safety cables). Cables made of ELASTOSIL® R 512/70 OH have successfully passed standards, like NFC 32070 CR1, DIN 4102 part 12, UL 2196, EN 50200, IEC 60331-11, etc.
The raw rubber requires the addition of peroxides for vulcanization at elevated temperatures. A homogeneous incorporation is a must, but please avoid temperatures >30°C along the incorporation process in order to maintain best processing behavior. Pot life is depending on the used peroxide and storage condition.
ELASTOSIL® R 512/70 OH is also available as a 2-component-system (ELASTOSIL® R 512/70 OH-1 & ELASTOSIL® R 512/70 OH-2). The advantage is that the properties of the compound can be adjusted easily by modifying the mixing ratio of component -1 & -2 for the particular application.
For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".
This product is available in 20 kg and 540 kg cardboard packaging.
Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.
The "Best use before end" date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Would you like a product sample?
You can request a product sample here.Request sample
|Appearance||Color||Density||Dielectric constant||Dielectric strength||Dissipation factor||Elongation at break||Hardness Shore A||Specific gravity||Tensile strength||Volume resistivity|
|ELASTOSIL® R 502/75 OH||- -||white white||1.28 g/cm³ 10.682 lb/gal||3.2 3.2||23 kV/mm 23 kV/mm||14 x 10⁻ ³ tan δ 14 x 10⁻ ³ tan δ||400 % 400 %||73 73||- -||8.7 N/mm² 8.7 N/mm²||10¹⁵ Ohmcm 10¹⁵ Ohmcm|
|ELASTOSIL® R 512/70 OH||beige beige||- -||1.37 g/cm³ 11.433 lb/gal||3.0 -||21 kV/mm -||- -||300 % 300 %||70 70||- -||6.5 N/mm² 6.5 N/mm²||10¹⁴ Ohmcm -|
|ELASTOSIL® R 757/60||Translucent -||- -||- -||- -||- -||- -||400 % -||62 -||1.16 g/cm³ 9.681 lb/gal||8.5 mPa -||- -|
 Density | DIN EN ISO 1183-1 A,  Hardness Shore A | ISO 7619-1,  Hardness Shore A | DIN 53505 | ± 5,  Tensile strength | ISO 37 type 1,  Tensile strength | DIN 53404 S1,  Elongation at break | ISO 37 type 1,  Elongation at break | DIN 53404 S1,  Volume resistivity | DIN IEC 93,  Volume resistivity | IEC 62631-3-1,  Dielectric constant | 50 Hz | IEC 62631-2-1,  Relative Permittivity | 50 Hz | IEC 62631-2-1,  Dissipation factor | 50 Hz | IEC 62631-2-1,  Dielectric strength | IEC 60243-1,  Electric strength | IEC 60243-1,  Appearance | DIN ISO 2137