ELASTOSIL® LR 3076/70 A/B
Self-adhesive liquid silicone rubbers of the ELASTOSIL® LR 3076 series are paste-like, easily-pigmentable two-component compounds with extremely short curing times and improved oil resistance. Their vulcanizates are noted for good mechanical and electrical properties.
ELASTOSIL® LR 3076 series are primerless, selfbonding grades that adhere to various plastic substrates (e. g. PA, PBT) and metals, but not in the mold. The bonding is improved by a subsequent heat treatment process (e. g. one hour at 100 °C) or by a longer storing at room temperature. Because of the individual surface properties each substrate must be tested before mass production. For further information on tested material combinations please refer to the corresponding adhesion tables which are available upon request from the responsible sales manager. The cured rubbers are of beige color and show excellent oil resistance.
Specific features of ELASTOSIL® LR 3076/70 A/B
- Oil resistant
- Reduced volatile content
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
ELASTOSIL® LR 3076 series are particularly suitable for the economical production of large series of overmolded parts (thermoplastic/elastomer. Because of the high oil resistance of ELASTOSIL® LR 3076 it is mainly used for the production of gaskets for automotive engines and in mechanical engineering.
Parts made from ELASTOSIL® LR 3076/70 can generally be used for technical applications without post-curing, but do not comply with regulations concerning use in the pharmaceutical and food industry.
The A and B components are delivered ready to use in 20 kg pail and 200 kg drum kits. With adequate metering equipment, they can be pumped directly from the original containers into the injection molding machine and mixed by a static mixer. The mixing ratio is 1 : 1. At room temperature, mixtures of A and B components have a pot life of at least three days.
Note: Start-up of new molds should be supported by use of ELASTOSIL® AUX Mold Release Agent 32.
For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".
This product is available in 20 kg pail and 200 kg drum kits.
Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
How can we help you?
Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Would you like a product sample?
You can request a product sample here.Request sample
Please choose an application for viewing your product matches.