ELASTOSIL® A 95 GREY
ELASTOSIL® A 95 GREY is a one part thixotropic sealant intended for use where a soft, high elongation material is desired. ELASTOSIL® A 95 GREY is particularly effective as an adhesive in applications where the bonded joint is subjected to relatively large movements in service.
Properties
- Tenacious adhesion to most metals, plastics, synthetic rubbers, glass and concrete
- Resistant to hot lubricating oils
- Low modulus of elasticity for superior sealant joint movement capability
- Low compressive modulus, ideal for forming compression gaskets on covers and closures where low clamping pressures are essential
- Stays flexible between -54°C and +204°C (-65°F and +400°F)
- Impervious to weathering and ultraviolet degradation
- Non-corrosive to ferrous metals
Data sheets
ELASTOSIL® A 95 GREY can be bulk dispensed to hand or robot applicators with conventional drum and pail extruder pumps equipped with high-pressure flexible fluid hoses. Caution! Hose pressure rating must exceed the maximum possible output of the pump and be moisture impermeable. Contact your Wacker Silicones representative for equipment recommendations. Surfaces to be bonded must be clean and free of oil, grease, soaps, dust, etc. Rubbers and plastics must be free of die lubricants and mold release agents. Certain plastics such as polypropylene require flame treatment to attain maximum adhesion.
Storage
Sales and support
Ann Arbor, MI 48108
United States
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.