The activity of SILFOAM® SP 150 is unaffected by a wide range of temperatures. SILFOAM® SP 150 has an excellent and lasting antifoam effect, which is of particular advantage in laundry detergents.


Specific features of SILFOAM® SP 150

  • Listed in EPA database
  • Powder

Effective release of the active ingredient takes place even at low temperatures, and a good antifoam effect is also achieved at elevated temperatures. SILFOAM® SP 150 is thus suited for both laundry detergent formulations with low washing temperatures and universal laundry detergents.
SILFOAM® SP 150 is recommended for phosphate-based and phosphate-free laundry detergents and can be used as a foam inhibitor on its own or combined with soap.
Due to its mode of action and carrier, SILFOAM® SP 150 has proved to be a universal antifoam agent for other powder products which are also likely to foam when they dissolve or are used, such as cleaners, granular pesticides etc.



SILFOAM® SP 150 has a very good flowability and is therefore easy to use. 0.5 - 2.5% are usually incorporated into the product to be defoamed, but if a very exact and extremely low dosage is desired, a premix with sodium sulphate or a carrier of your choice can be prepared.


The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
3301 Sutton Road
Adrian, MI 49221-9397
United States
+1  888  922-5374 (Phone)

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question


My media

My favorites

My products