WACKER® CROSSLINKER V 24
WACKER® CROSSLINKER V 24 is a solvent-free Hydrogenpolysiloxane containing reactive Si-H groups.
- good cure
- low release
- good release stability
- excellent anchorage to a paper and film substrates
WACKER® CROSSLINKER V 24的特殊性能
WACKER® CROSSLINKER V 24 is used for curing crosslinking solvent-based and solvent-free DEHESIVE®-systems.
Batches of coating compound must be prepared in the order given below.
1. First pour in CRA® Modifier in case CRA® is used.
2. Add DEHESIVE® polymer in several portions and stir slowly until the mixture is homogeneous.
3. Thoroughly stir in WACKER® CROSSLINKER V 24 to this mixture.
4. Slowly stir in catalyst.
Local over-concentrations must be avoided.
Any contact to alkaline systems needs to be avoided.
Store in a dry and cool place
The 'Best use before end' date of each batch is shown on the product label.
Storage in unopened packaging beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.