ELASTOSIL® P 7616-160 A/B
Addition-curing RTV-2 silicone rubber that cures to form a soft gel.
- low viscosity
- good adhesion to polyurethane film
- has no known harmful effects
- easy metering
- easy to mix
ELASTOSIL® P 7616-160 A/B的特殊性能
ELASTOSIL® P 7616-160 A/B is used for the production of external mammary prostheses with an outer skin of polyurethane film.
Component B must be homogenized thoroughly before use, since the color pigments tend to settle during prolonged storage. Components A and B are mixed in a ratio of 1 : 1, air bubbles have to be removed by evacuation.
Curing is preferably conducted at 120 °C / 1 h.
Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”
The platinum catalyst is in component A.
Only A and B components with the same batch number may be processed together!
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.