SILRES® BS 50

SILRES® BS 50 is a solventfree, water-thinnable emulsion of a special silicone resin / polydimethylsiloxane blend. It is recommended as an additive for porous masonry coatings to make them water repellent. SILRES® BS 50 is particularly suitable for silicate emulsion paints and plasters.



SILRES® BS 50 is added undiluted to coatings either during or immediately after manufacture. We recommend adding 1-3 wt%.


SILRES® BS 50 is used as a water-repellent additive for silicate emulsion paints and whitewashes. By adding the water repellent, hydrophobic paints are obtained and the pigments are prevented from washing out, i. e. fading of the coatings is prevented. The durability of the paint is significantly increased.

SILRES® BS 50 is suitable as an additive to impart water repellency to mineral-based plasters, particularly to silicate emulsion plasters. It is recommend for lime and lime-cement plasters for the final layer of the plaster which should be 0.5 to 1cm thick. SILRES® BS 50 is added to the mixing water of the mortar preparation. Good water-repellent effect is obtained by adding 5-8 l/m³ finished mortar. The product will develop its effect as the plaster dries out.

储存

The "Best use before end" date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

销售和支持

Wacker Chemicals (China) Co.,Ltd.
Caohejing Hi-Tech Park
200233 Shanghai
中国大陆
+86  21  6130-2000 (电话)
+86 21 6130-2500  (传真)
Contact Sales

我们可以为您提供什么帮助?

  • 您在选择产品方面需要帮助或者需要技术咨询? 请联系我们的专家
Ask a question

购物车

我的媒体


收藏夹

我的产品